Protect your Sprinter-chassis Class C cab from the inside out. The ADCO 01-1636 windshield cover wraps the windshield and side cab windows in extra heavy-duty white vinyl, blocking UV rays that fade dashboards and crack upholstery -- with zero drilling, zero snaps, and zero tools required. Sewn-in magnets and anti-theft tabs lock the cover in place; you pull it off in seconds when you're ready to roll.
The Sprinter chassis is one of the most popular platforms for Class C builds, and its large panoramic windshield means a massive amount of UV exposure for your dash, steering wheel, and cab interior every time you park in the sun. The ADCO 01-1636 is purpose-built for this chassis -- it covers the windshield and both front side windows in a single piece, so there are no gaps for sunlight to sneak through.
The extra heavy-duty white vinyl reflects solar heat before it builds inside the cab, keeping interior temps noticeably lower during storage or while parked at a campsite. It also adds a layer of privacy and a basic visual deterrent against opportunistic break-ins, without the cost or hassle of permanent window tinting.
No snaps, screws, or drilling required. Sewn-in door pockets and extra-strength magnets hold the cover securely against the cab from the outside.
Magnetic fasteners include anti-theft tabs that prevent the cover from being pulled off without releasing the tabs first -- a simple but effective deterrent.
Covers the windshield and both front side cab windows in one piece, eliminating gaps that let UV and heat reach the dash and interior.
Continuous UV exposure causes dashboards to fade, crack, and warp. This cover is a low-cost way to preserve the value and appearance of your cab interior.
The 01-1636 is built from extra heavy-duty white vinyl -- the same material ADCO uses across their commercial-grade cover line. White was chosen deliberately: it reflects more solar radiation than silver or gray tones, keeping the cab cooler during storage. The stitching reinforces the sewn-in door pockets and magnet housings so the cover holds its shape season after season.
Drape the cover over the cab exterior from the front. The sewn-in door pockets tuck into the front door jambs when you close the doors, anchoring the lower edges. The magnetic fasteners pull the cover tight against the cab body along the sides and top. Anti-theft tabs must be released before the magnets will disengage, so the cover can't simply be peeled off by hand. Removal takes roughly 30 seconds. No ladders needed for most Class C rigs -- the windshield height is accessible from ground level.
This cover is designed specifically for the Mercedes-Benz Sprinter chassis as used by Class C motorhome manufacturers from the 2007 through 2019 model years. The Sprinter windshield and cab dimensions changed significantly from earlier vans to the 2007+ platform, and again after the 2019 redesign -- so year-range fitment matters. If your Sprinter-based Class C was built on a 2020 or newer chassis (NCV3 third-generation facelift), verify the cab profile matches before ordering.