Keep your RV cooler and protect your interior from damaging UV rays with the Camco SunShield. Its triple-layer construction -- air-filled bubble cells sandwiched between two layers of reflective foil film -- reflects solar heat before it enters the coach. Velcro mounting pads mean no tools, no drilling, and no mess. When you're done, it collapses flat for easy storage in a cabinet or under a mattress.
The SunShield works on a simple principle: reflect the sun's energy away from the glass before it can convert to radiant heat inside your RV. The outer foil layer bounces solar radiation, the air-cell core acts as an insulating buffer, and the inner foil layer blocks any residual thermal transfer. The result is a measurable reduction in interior temperature on sunny days -- especially important for slideout windows, coach windows, and entry door windows that face direct sun.
At 62 inches wide by 30 inches tall, this size is well suited to large coach sidewall windows, entry door windows, and windshield sections on Class B and smaller Class C motorhomes. Always measure your window opening before ordering -- the cover should fit within the frame, held in place by the included Velcro pads.
Air-filled polypropylene cells are encapsulated between two layers of reflective foil film, combining insulation and solar reflection in one lightweight panel.
Included Velcro pads attach to the window frame for a secure, tool-free fit. No drilling or adhesives required on the glass or trim.
The flexible panel folds or rolls flat when not in use, taking up minimal space in a storage bay, cabinet, or under a slide-out sofa.
The silver reflective exterior significantly reduces UV transmission, helping protect upholstery, flooring, and dashboard surfaces from sun fade.
Many RV owners use SunShield panels on entry door windows, overhead cab windows in Class C motorhomes, and even on interior compartment doors that face the sun. The Velcro attachment system is flexible enough to work on most smooth interior window frames.
The 62 in. x 30 in. dimension is the overall panel size. Measure your window opening (glass-to-glass or frame-to-frame, depending on your mounting preference) before purchasing. Camco offers the SunShield in multiple sizes to cover windshields, slideout windows, and standard coach windows. If this size does not match your opening, check the other SunShield listings for a closer fit.
For best Velcro adhesion, clean the window frame surface with isopropyl alcohol before applying the Velcro pads. Allow the adhesive to cure for at least 24 hours before mounting the panel in high-heat conditions. On textured or painted trim, adhesion may vary -- test one pad before committing all attachment points.