Transfer your Arvika bike rack between your travel trailer, tow vehicle, car, or truck without buying a second rack. The 7000-H2 bolts into any standard 2-inch receiver and provides the horned mounting interface that all Arvika standard and eBike racks are designed to seat onto -- including a built-in support arm that keeps heavier eBike loads stable on the road.
If you tow an RV and also drive a tow vehicle or car, the Arvika 7000-H2 means your bike rack can follow you -- not the other way around. The horned design is the universal docking interface used across the Arvika rack lineup, so whether you own a standard platform rack or a heavier-duty eBike model, this adapter accepts both.
The included support arm is not just a brace -- it is engineered to redistribute the load and reduce sway, which matters most when carrying heavy electric bikes. The all-steel-and-aluminum build keeps the adapter itself rigid while keeping overall weight reasonable at 40 lbs.
Accepts any Arvika standard or eBike rack that uses the horned mount interface -- no additional brackets needed.
Slides directly into any standard 2-inch square hitch receiver on cars, trucks, SUVs, or RV bumpers.
Integrated support arm improves weight distribution and reduces rack sway -- especially important for heavy eBike loads.
Structural steel shank and frame with aluminum components keep the adapter rigid without unnecessary weight penalty.
The 7000-H2 is aimed at two primary use cases:
Because the adapter uses the same horned mount geometry as Arvika's factory-installed receiver posts, swapping the rack from the adapter to any other Arvika-equipped vehicle is straightforward -- no tools required at the rack itself.
The 7000-H2 has a larger footprint than a standard ball mount. Review the dimensions below before ordering, particularly if your vehicle has a short rear overhang or a spare tire that could limit clearance.
The shank and main structural frame are steel for maximum rigidity under load. Secondary components and brackets use aluminum to reduce unnecessary weight. At 40 lbs., the adapter itself is substantial -- factor this into your hitch tongue-weight calculation when also loading bikes onto the rack.