OEM replacement auto level keypad for EQ Systems motorhome leveling systems. Replaces keypads 2318 and 3012 only. 4-wire connection.
The EQ Systems 3103 is the factory OEM replacement keypad for motorhomes and RVs equipped with EQ Systems auto level controllers 2318 or 3012. When your existing keypad fails, fades, or stops responding, the 3103 restores full auto level functionality using the same genuine EQ Systems engineering that powered the original system.
This is a direct replacement part from the manufacturer — the same company that built your original leveling system. It connects via a simple 4-wire harness (red, black, green, and brown) and is designed to mount in the same location as the keypad it replaces. Before ordering, confirm your existing keypad part number is 2318 or 3012, as the 3103 is not compatible with other EQ Systems keypad models.
Genuine EQ Systems part — the same manufacturer that built your original auto level system
Red, black, green, and brown wire harness for straightforward, plug-in installation
Designed to replace keypads 2318 and 3012 only — confirm your part number before ordering
Built specifically for motorhome and RV auto level applications using EQ Systems equipment
The EQ Systems 3103 keypad is designed to replace keypads 2318 or 3012 only. It is not compatible with other EQ Systems keypad models or non-EQ Systems leveling systems. How to verify your existing keypad: • Locate the part number printed or labeled on your current keypad • Confirm it reads 2318 or 3012 • If your part number is different, contact EQ Systems directly to identify the correct replacement Not sure? Call EQ Systems at 1-800-846-9659 before purchasing. Installing an incompatible keypad will not restore auto level function.
The 3103 does not include a built-in mounting box like the 2318 keypad. When replacing a 2318 unit, remove the existing box — the 3103's screw holes will align with the existing mounting holes where the box was located. Wiring: Match the 4 wires by color (red, black, green, brown) to the corresponding leads from your existing harness. Do not power on the leveling system until all connections are secure. If you are unsure about any aspect of the installation, EQ Systems recommends contacting a qualified RV service technician or reaching out to their technical support team before proceeding.
The 3103 replaces these EQ Systems keypads: • 2318 — Auto Level Keypad (older motorized unit style with mounting box) • 3012 — Auto Level Keypad (motorhome leveling system controller) The 3103 does NOT replace: • Any other EQ Systems keypad models • Manual leveling system controllers • Non-EQ Systems / competitor leveling keypads Always confirm your existing part number before ordering. Contact EQ Systems support if your part number is not listed above.
Basic Installation Steps: 1. Disconnect Power: Turn off the RV leveling system and disconnect shore power before beginning 2. Remove Old Keypad: Unscrew and remove the existing 2318 or 3012 keypad and its mounting hardware 3. Disconnect Wiring: Carefully disconnect the 4-wire harness from the old keypad, noting color positions 4. Mount the 3103: Align the 3103 to the existing mounting hole locations and secure with screws 5. Connect Wiring: Match and connect wires by color — red, black, green, and brown 6. Test System: Restore power and verify auto level functionality on all modes
Technical Support: EQ Systems Toll Free: 1-800-846-9659 Local: 574-264-3437 Hours: Monday–Friday, 7AM–4PM EST Warranty: 1-Year Limited Manufacturer's Warranty covering defects in materials and workmanship under normal use. Not sure this is the right part? Contact EQ Systems before ordering to verify compatibility with your specific leveling system. Manufacturer: EQ Systems — 19300 Grange St, Cassopolis, MI 49031