When your B&W Turnoverball gooseneck hitch needs a new ball or the safety chain anchor loops are worn, bent, or missing, the GNXA2062 gives you factory-spec hardware -- not an aftermarket approximation. This is the genuine B&W OEM ball and safety chain loop assembly built to mate precisely with B&W gooseneck hitch systems already installed in your truck bed. No fitting guesswork, no drilling new holes -- it drops in where your original hardware lived.
B&W Hitches is the industry benchmark for under-bed gooseneck hitch design. Their Turnoverball system is one of the most popular gooseneck platforms in North America, found in hundreds of thousands of pickup trucks towing fifth-wheel trailers, livestock trailers, flatbeds, and equipment haulers. The GNXA2062 is the OEM ball and safety chain loop assembly engineered specifically for that system.
The safety chain loops on a gooseneck setup carry a legal and safety-critical function -- they are the last line of defense if a trailer coupler separates from the ball. Using a worn, cracked, or incorrect loop assembly is not a compromise worth making. This assembly restores your rig to factory specification and keeps you legal and safe on the road.
Engineered by B&W to match the exact mounting geometry of Turnoverball gooseneck hitch receivers. No adapters or modifications required for compatible installations.
Includes both the gooseneck hitch ball and the safety chain anchor loops as a complete assembly -- replace worn components together for matched performance.
Built to B&W's OEM standards with high-strength steel construction rated for demanding towing applications. Matches the durability of the original factory-installed hardware.
Designed as a direct service replacement for the ball and safety chain loop components in B&W Turnoverball and compatible gooseneck hitch platforms.
The GNXA2062 assembly includes the gooseneck hitch ball and the integrated or paired safety chain anchor loops -- the complete hardware assembly needed to restore a B&W gooseneck hitch to operational condition. Always verify your specific hitch model against the B&W fitment guide to confirm this assembly is the correct replacement for your installation.
Replacing the ball and chain loop hardware together ensures uniform wear life and consistent thread engagement. Mixing a new ball onto a worn loop mount -- or vice versa -- can introduce misalignment that stresses the connection under load. B&W packages these as a matched set for good reason.
The GNXA2062 is designed for B&W Turnoverball gooseneck hitch systems. B&W's Turnoverball platform is available in a wide range of truck-specific models for Ford F-Series, GM Silverado and Sierra, Ram 1500/2500/3500, and Toyota Tundra applications. The ball and chain loop assembly is a shared serviceable component across multiple bed-specific hitch frames.
B&W produces multiple Turnoverball frame variations tailored to specific truck bed configurations and model years. The GNXA2062 is an OEM service part -- match your existing hitch model number (found on a sticker or stamping on the hitch frame under the bed) to verify this is the correct ball and chain loop assembly for your installation.
Federal and state towing regulations require functional safety chains on all towed trailers. On a gooseneck setup, the safety chains attach to anchor loops that are part of the hitch ball assembly. These loops must be:
Inspecting the chain loops every season -- and replacing them at the first sign of wear, corrosion pitting, or impact damage -- is standard preventive maintenance for any serious gooseneck operator.
The towing capacity of any gooseneck system is limited by the lowest-rated component in the chain -- truck rating, hitch frame rating, ball rating, and chain loop rating. Verify that this assembly's rating is compatible with your trailer's gross trailer weight (GTW) and pin weight before towing. Never tow beyond the published ratings of any hitch component.