A straightforward, reliable fix for a burned-out or cracked interior dome light in your RV, camper, or travel trailer. The Camco 41330 is a direct-replacement 12-volt single dome light that ships with everything you need to get your cabin lighting back up and running -- bulb, housing, and installation instructions all in the box.
Interior dome lights in RVs take a beating -- vibration on the road, temperature swings from desert heat to mountain cold, and the occasional hard bump that cracks a lens or burns out a socket. The Camco 41330 is sized and wired for standard 12V RV electrical systems, so you are not rewiring anything or sourcing an adapter.
At just 2.4 ounces and a slim 1.25-inch depth, this fixture fits flush against ceilings and wall panels without adding bulk. The 7-inch length and 4.5-inch width match the footprint of common OEM-style single dome lights found in a wide range of RV brands and floorplans.
Ships with a compatible 12V replacement bulb -- no separate trip to the hardware store before you can install it.
Only 1.25 inches deep. Sits flush against RV headliners and wall panels without protruding into headroom.
Designed for standard 12-volt DC RV electrical systems. Works directly off your coach battery or converter output.
At 2.4 oz total, it adds virtually no load to ceiling panels or thin RV wall substrates.
Most RV dome light replacements involve three steps: disconnect the old fixture from its two-wire 12V feed (positive and negative), remove the mounting screws from the ceiling or wall panel, and reverse the process with the new unit. No special tools are required beyond a small Phillips screwdriver.
Camco includes printed instructions in the box. Match the wire colors (typically red/positive, white or black/negative) before tucking the wiring back into the panel cavity.