Level your RV, camper, trailer, or tow vehicle with the Camco 44521 FasTen leveling block set. This 10-pack of brown interlocking blocks includes a T-handle for carrying and securing the blocks together for storage.
The Camco 44521 FasTen RV Leveling Blocks provide a customizable leveling solution for RVs, campers, trailers, and tow vehicles while parked. The interlocking 2x2 blocks stack to the desired height to help create a stable leveling platform.
Each block adds approximately 1" of stack height, and Camco recommends not using the blocks with a stack height over 4-1/2". The included T-handle pulls up for carrying and twists down to secure the blocks together for storage.
Helps level RVs, campers, trailers, and tow vehicles while parked
Stackable design lets you build height as needed
Handle helps carry and lock the blocks together for storage
Includes ten brown 2x2 leveling blocks
Designed for RV leveling and stabilization use while parked. Do not exceed a 4-1/2" stack height. Confirm tire size, jack foot size, ground surface, leveling needs, and vehicle manufacturer recommendations before use.
1. Choose Location: Park on firm, stable ground and determine which wheel or jack point needs additional height. 2. Stack Blocks: Interlock the blocks to create the needed leveling height without exceeding the 4-1/2" maximum stack height. 3. Position Vehicle or Jack: Carefully drive onto the block stack or place the jack foot on the prepared block surface as appropriate. 4. Verify Stability: Confirm the RV, trailer, or jack is stable and properly supported before occupying or working around the vehicle. 5. Store Blocks: After use, stack the blocks together and twist the T-handle down to secure them for storage.
Ten Camco 44521 FasTen brown 2x2 RV leveling blocks One T-handle for carrying and storage
Camco Customer Support: Phone: 800-334-2004 Website: camco.net For fitment help, confirm the RV weight, tire size, jack foot size, ground surface, stack height requirements, and complete leveling setup before ordering.