Premium 50-foot drinking water hose for RVs, boats, camping, and outdoor freshwater connections, with 5/8" inside diameter, lead-free construction, anti-kink design, and UV-stabilized PVC.
The Camco 22853 TastePURE Premium Drinking Water Hose is designed to connect an RV, camper, boat, or campsite setup to a safe freshwater source. Its 50-foot length provides extra reach at campgrounds, marinas, storage lots, or around the home, while the 5/8" inside diameter helps maintain practical water flow for filling tanks or connecting to city water.
This premium hose is made for drinking water use and is built with lead-free, BPA-free, and phthalate-free materials. Its anti-kink design, machined fittings, strain-relief ends, and UV-stabilized PVC construction help improve durability compared to standard lightweight water hoses.
Designed for RV, marine, camping, and outdoor freshwater use
Extra reach for campground spigots, boats, tanks, and outdoor hookups
Helps provide strong flow for filling tanks or city water connection
Anti-kink construction with strain-relief ends for easier handling
This hose is designed for drinking water and freshwater applications. Do not use the same hose for black tank flushing, sewer rinsing, chemical transfer, fuel, oil, or non-potable water service. For best results, flush the hose before first use and after storage. Store with the ends capped or protected to help keep dirt, insects, and debris out of the hose.
Before Starting: Inspect the hose, fittings, washers, and water source before connecting. Use only with potable or freshwater connections when the hose will be used for drinking water. Basic Use Steps: 1. Flush Before Use: Run clean water through the hose before first use and after storage. 2. Attach to Water Source: Connect one end to the campground, marina, or home water spigot. Use a washer if needed to help prevent leaks. 3. Connect to RV or Tank Fill: Attach the other end to the RV city water inlet, freshwater fill, boat inlet, or approved potable-water connection. 4. Check for Kinks: Lay the hose out with gentle bends to maintain better flow and reduce strain on the fittings. 5. Turn Water On Slowly: Pressurize the hose gradually and check both ends for leaks. 6. Use a Regulator if Needed: For RV city water connections, use an RV water pressure regulator when required by your RV plumbing system. 7. Drain After Use: Disconnect, drain, and coil the hose before storage. 8. Store Clean: Keep hose ends protected from dirt, insects, and sewer-area contamination.
Package Contents: • 1 Camco 22853 TastePURE premium drinking water hose • 50 ft hose length with 5/8" inside diameter • Factory-installed hose fittings with strain-relief ends NOT Included — May Also Need: • RV water pressure regulator • Inline water filter • Hose elbow / 90-degree city water connector • Quick-connect fittings • Hose washers or replacement seals • Hose caps or storage bag • Separate non-potable hose for sewer rinse or black tank flush use This listing is for the drinking water hose only unless otherwise stated. Confirm any adapters, regulators, or filters needed for your RV setup before ordering.
To confirm this hose is right for your setup, consider the following: • Distance from campground spigot to RV water inlet • Whether 50 ft is the preferred length or if a shorter hose would be easier to store • Whether your RV uses a city water inlet, gravity fill, or both • Whether your setup needs a pressure regulator or inline water filter • Storage space available for a 50 ft hose • Whether the hose will be used only for drinking/freshwater applications Why this matters: Drinking water hoses should be kept separate from sewer rinse hoses, tank flush hoses, and general-purpose utility hoses to reduce contamination risk.
Match this hose by length, inside diameter, drinking water certification, connection style, and intended use. Keep potable water hoses separate from sewer rinse or utility hoses.
If water flow, taste, odor, or leak issues continue, check the hose washers, water source, filter, regulator, RV inlet, and freshwater plumbing before replacing additional parts.
Use this hose only for drinking water and freshwater applications. Do not use it for black tank flushing, sewer hose rinsing, chemicals, fuel, oil, wastewater, or non-potable service. Always flush before use, store with hose ends protected, and use a pressure regulator when required by your RV plumbing system.