Home > LP Gas > LP Hoses >

Camco 59033 Propane Supply Hose 5 Ft -- POL x 1/4 In Male Inverted Flare with Excess Flow Protection

Camco 59033 5-foot propane supply hose with POL soft-nose inlet and 1/4 inch male inverted flare outlet, built-in excess flow protection
Camco Propane Supply Hose - 5'
 
Alternative Views:


List Price: $45.09
: $34.99
You save $10.10!
Part Number: 59033
Manufacturer: Camco

Quantity in Stock :19

Availability: In Stock
Qty:

 
Camco 5 Ft Propane Hose Excess Flow Protection Camco 59033 Propane Supply Hose -- 5 Foot, POL x 1/4 In Male Inverted Flare

A straightforward, code-compliant propane supply hose that connects a standard 20 lb or 30 lb DOT cylinder to any appliance or fitting with a 1/4 in inverted flare inlet. The soft-nose POL fitting threads onto the cylinder valve without a wrench, and the built-in excess flow valve automatically restricts gas flow if a downstream line is severed or a connection fails -- a simple safety feature that matters in any RV, camper, or outdoor setup.

Reliable Propane Supply with Built-In Safety

The Camco 59033 is a five-foot rubber propane supply hose designed for everyday use between a standard vertical DOT propane cylinder and downstream appliances or distribution hardware. The POL (Prest-O-Lite) inlet is a flow soft-nose design -- it seats and seals by hand-tightening left-hand threads directly into the cylinder valve, no wrench required on that end.

The outlet is a 1/4 in male inverted flare fitting, which is the standard connection used on most RV propane regulators, Camco tee fittings, and a wide range of outdoor propane appliances. If your appliance has a 1/4 in female inverted flare port, this hose connects directly with no adapter needed.

Excess Flow Protection

Built-in excess flow valve restricts gas automatically if a downstream line ruptures or a fitting separates unexpectedly.

Hand-Tight POL Inlet

Soft-nose Prest-O-Lite (POL) fitting threads left-hand into standard 20 lb and 30 lb cylinder valves -- no wrench needed at the tank.

1/4 In Inverted Flare Outlet

Male inverted flare outlet mates directly to regulators, Camco tee fittings, and most propane appliance inlets rated for that connection.

5-Foot Working Length

Five feet of flexible hose gives enough reach to position your appliance or regulator away from the cylinder without a rigid adapter stack.

Compatible Camco Fittings and Hardware

This hose is specifically listed for use with the Camco 4-Port Propane Tee (#59123) and the Camco Propane Brass Tee with 4 Ports (#59125). Those tees let you distribute propane from a single cylinder to multiple appliances -- common in base camp setups, tailgating, or RV sites where a generator, camp stove, and heater all share one tank.

  • Camco 4-Port Propane Tee #59123 -- use this hose as the supply line from the cylinder
  • Camco Propane Brass Tee with 4 Ports #59125 -- same application, brass body variant
  • Any regulator or appliance inlet with a 1/4 in female inverted flare connection
No Adapter Needed in Most Setups
The 1/4 in male inverted flare outlet is the most common downstream propane connection size in the RV and outdoor market. If your regulator or tee fitting has a 1/4 in female inverted flare port, this hose plugs straight in.

What the Excess Flow Valve Does -- and Does Not Do

The excess flow valve is a passive safety device built into the hose. If downstream flow suddenly exceeds the valve's trip threshold -- for example, if a hose downstream separates under pressure -- the valve restricts flow significantly, limiting the amount of gas that can escape. It is not a regulator and does not limit operating pressure. It is also not a shutoff valve: always close the cylinder valve manually when the system is not in use.

Excess Flow Reset
If the excess flow valve trips, close the cylinder valve completely, wait 30 seconds, then slowly reopen. If it trips repeatedly, inspect all downstream connections before continuing.

Typical Use Cases

  • Connecting a single 20 lb or 30 lb DOT cylinder to an RV propane regulator during a campsite setup where the factory pigtail hose needs replacement or extension
  • Supplying a Camco propane tee or manifold from a portable cylinder at a base camp or tailgate
  • Replacing a worn, cracked, or kinked supply hose on any system using a POL cylinder valve and a 1/4 in inverted flare appliance connection
  • Temporary or seasonal propane distribution setups where flexibility and quick cylinder changes are needed
Maintenance Note
Inspect this hose before each use. Check for cracks, abrasion damage, kinking, or any signs of deterioration in the rubber jacket. Apply a soap-and-water solution to all connections after assembly and look for bubbles indicating a leak. Replace the hose immediately if any damage or leak is detected. Do not use an open flame to check for leaks.
Sold as Single Unit
This listing is for one (1) Camco 59033 propane supply hose. If you are building a multi-hose distribution setup, confirm how many hoses your tee or manifold configuration requires before ordering.

Product Identification

ManufacturerCamco
Model / Part Number59033
SKU06-0494
UPC014717590334
WarrantyLimited 90-day manufacturer warranty
Quantity Included1 hose

Hose Specifications

Hose Length5 feet (60 inches)
Inlet Fitting TypeFlow Soft-Nose POL (Prest-O-Lite)
Inlet Thread DirectionLeft-hand (standard POL cylinder valve)
Outlet Fitting TypeMale Inverted Flare
Outlet Fitting Size1/4 inch
Safety FeatureBuilt-in excess flow protection valve
Approximate Weight1 lb

Cylinder Compatibility

Compatible Cylinder TypesStandard 20 lb DOT propane cylinder, 30 lb DOT propane cylinder
Cylinder Valve Type RequiredStandard POL (Prest-O-Lite) valve -- common on vertical DOT cylinders
Not Compatible WithACME/QCC1 (Type 1) quick-connect cylinder valves without a separate POL adapter

Downstream Connection

Outlet Standard1/4 in female inverted flare (required on appliance or fitting side)
Compatible Camco TeesCamco #59123 (4-Port Tee), Camco #59125 (Brass 4-Port Tee)
Typical Compatible DevicesPropane regulators, distribution tees, camp stoves, heaters with 1/4 in inverted flare inlet

Regulatory and Safety

Excess Flow ValvePassive, built-in -- trips on sudden high-flow downstream event
Intended Gas TypeLP gas (propane) only
Indoor UseNot recommended -- propane appliances require adequate outdoor or code-approved ventilation
Important Safety Information
  • For use with LP (propane) gas only. Do not use with natural gas, butane, or any other fuel without verifying compatibility with all components in the system.
  • Always close the cylinder valve when the system is not in active use. The excess flow valve is a safety aid, not a substitute for proper shutoff procedure.
  • Inspect the hose for cracks, cuts, abrasion, or kinking before every use. A damaged hose must be replaced immediately -- do not attempt to repair it.
  • Leak-test all connections with soapy water after every assembly. Never use an open flame to check for leaks.
  • Not compatible with QCC1 (Type 1 / ACME) cylinder valves without a separate POL-to-QCC1 adapter -- sold separately.
  • Keep hose away from open flame, hot surfaces, and sharp edges during use and storage.
  • Limited 90-day manufacturer warranty covers defects in materials and workmanship. Damage from misuse, improper installation, or use with incompatible fittings is not covered.


Browse for more RV Accessories in the same category as this item:

LP Gas > LP Hoses
LP Gas


$35.99
$52.50
$27.61