Keep your RV sewer hose elevated, properly angled, and fully drained every time you dump. The Camco Sidewinder supports up to 20 feet of standard 3-inch sewer hose off the ground, guides it smoothly around campsite obstacles, and holds it in place without straps, staples, or hardware that can rust or fail.
A sewer hose that sags, pools, or lies flat on the ground doesn't drain cleanly. Waste backs up in low spots, and the mess that follows is exactly the kind of campsite problem no one wants. The Sidewinder solves this by cradling your hose at a consistent downward angle from the RV's sewer outlet all the way to the dump station connection.
Unlike accordion-style ramps that run in a straight line, the Sidewinder's linked-section design articulates around obstacles -- concrete pads, landscaping timbers, hookup pedestals, uneven terrain -- without you having to reposition the whole run. Snap-fit hinges lock each section into position and won't creep closed once set.
Wide, deep cradle profile grips standard 3-inch sewer hose securely -- no straps, no tie-downs, no fumbling with buckles during setup or teardown.
Snap-fit hinges let you bend the run left or right to route around campsite obstacles a rigid ramp simply can't navigate.
All-plastic construction means no staples or fasteners to corrode, no sharp edges after a season of storage, and easy rinse-off cleaning.
Once positioned, sections hold their angle and don't migrate or collapse -- critical when you're walking away and leaving the hose unattended during a long dump.
The CMC43051 ships as a complete 20-foot support kit. Sections snap together without tools and disassemble quickly for compact storage. The connected sections pack down into a manageable bundle that fits alongside your sewer hose in a standard bumper storage tube or a dedicated hose bag.
Snap all sections together before laying them out. Start at the sewer outlet fitting on your RV -- that end should be highest. Walk the run toward the dump station, using the hinge joints to angle around any obstacle. The cradle height ranges from approximately 4 inches at the low end to 7-1/4 inches at the high end, giving you a natural slope across a full 20-foot run.
The Sidewinder cradle is sized for standard 3-inch (23mm bayonet-fitting) RV sewer hoses -- the size used by virtually all Class A, Class C, fifth-wheel, and travel trailer rigs sold in North America. It works with Camco's own RhinoFLEX, RhinoEXTREME, and TastePURE sewer hose lines as well as most third-party 3-inch sewer hoses. It does not replace your sewer hose -- it supports it.