The OEM-matched replacement spring assembly your Carefree awning needs to roll up and stay put. Designed specifically for the left-hand rafter arm on Spirit, Fiesta, Simplicity, and Full-Timer awnings from 8 to 18 feet, this black spring assembly restores correct spring tension so your awning opens smoothly and retracts with confidence.
A worn or broken awning spring assembly is one of the most common reasons an RV awning refuses to retract fully, sags on one side, or loses the tension needed to hold the fabric taut in the wind. The R00923BLK-A replaces the left-hand spring assembly with a direct OEM fit -- no cutting, no adapting, no improvising.
Carefree of Colorado manufactures this assembly in the USA using the same materials and tolerances as the original unit that came on your rig. The black powder-coat finish blends with standard Carefree hardware without drawing attention to a repair.
Designed for the left-hand rafter arm. Installing the wrong side will result in improper spring wrap direction and failed retraction.
Fits Spirit, Fiesta, Simplicity, and Full-Timer awning models from 8 feet to 18 feet in length -- covering the majority of Carefree manual and semi-automatic awnings.
Matches standard Carefree hardware color. Resists fading and surface corrosion from outdoor UV and moisture exposure.
Genuine Carefree of Colorado part, manufactured domestically to OEM specifications with a 1-year warranty.
Stand facing your RV from outside. The left-hand side of the awning is on your left as you face the coach. The R00923BLK-A mounts to the rafter arm on that side. If your damaged or worn assembly is on the right-hand side, you need a different part number.
Hardware, rafter arms, awning fabric, and installation tools are not included. Refer to the awning arm for existing hardware reuse.