Low-profile white RV gravity-flush toilet with a porcelain round bowl, lightweight plastic base, foot pedal flush, soft-close seat, and compact 2-bolt replacement design.
The Dometic 9610008263 411 Complete is a low-profile RV toilet designed for compact RV, camper, travel trailer, fifth wheel, motorhome, and marine bathroom installations. Its shorter seat height makes it a practical option for raised platforms, tight bathroom layouts, or installations where a standard-height toilet would sit too tall.
This toilet combines a porcelain round bowl with a durable lightweight base for easier cleaning and a more residential feel than many all-plastic RV toilets. The pedal-activated gravity flush, soft-close seat, 360° bowl rinse, and 2-bolt mounting design make it a strong replacement option when the rough-in, water line, and bathroom clearance match.
Shorter toilet height works well for raised platforms and compact RV bathrooms
Glossy round bowl is easier to clean than many plastic bowl designs
Pedal-activated gravity flush for hands-free RV toilet operation
Included seat and lid help reduce slamming during everyday use
Dometic 9610008263 is the 411 Complete / low-profile white toilet. Before ordering, verify your existing toilet height, rough-in distance, floor flange, water line location, rear wall clearance, side clearance, and front clearance. This is a gravity-flush RV toilet. It is not a macerating toilet, cassette toilet, composting toilet, portable toilet, or residential home toilet.
Before Starting: Shut off the RV water supply, turn off the water pump and city water connection, relieve pressure, and drain the toilet water line before removing the old toilet. Wear gloves and follow sanitation procedures around the floor flange and holding tank opening. Basic Installation Steps: 1. Confirm Fitment: Measure rough-in, rear wall clearance, side clearance, front clearance, water line location, seat height, and old toilet footprint. 2. Turn Off Water: Shut off the RV water pump and city water supply, then flush to relieve pressure. 3. Disconnect Water Line: Carefully disconnect the water supply from the existing toilet. 4. Remove Existing Toilet: Remove mounting hardware and lift the old toilet off the floor flange. 5. Inspect Flange and Floor: Check the floor flange, mounting bolts, seal surface, and surrounding floor for cracks, leaks, softness, or damage. 6. Install New Seal: Use the correct RV toilet floor seal or gasket for the installation. Replace old or compressed seals. 7. Position Toilet: Set the toilet evenly over the floor flange without shifting or damaging the seal. 8. Tighten Evenly: Secure mounting hardware evenly without overtightening, as toilet bases and RV flanges can crack. 9. Reconnect Water: Attach the RV water supply line and verify proper seating at the connection. 10. Test Operation: Restore water pressure, test the foot pedal flush, inspect for leaks, and confirm the bowl seal holds water.
Package Contents: • 1 Dometic 9610008263 411 Complete low-profile white RV toilet • Porcelain round bowl with lightweight plastic base • Factory-installed soft-close seat and lid • Integrated foot pedal flush assembly • Water valve / internal flush components as supplied by manufacturer NOT Included — May Also Need: • Floor flange seal or replacement gasket if not supplied • Replacement floor flange or flange repair parts • Water line adapter or fitting, depending on RV plumbing • Mounting hardware if old hardware is damaged or not reusable • Toilet floor bolts, caps, or trim pieces if not supplied • Hand sprayer kit • RV toilet chemicals or bowl cleaner • Installation tools and sanitation supplies This listing is for the RV toilet only unless otherwise stated. Confirm required seal, hardware, water line fitting, and flange condition before ordering.
To confirm compatibility before ordering, have the following ready: • Existing toilet brand and model number • Photos of the old toilet, floor flange area, and water line connection • Distance from floor flange center to rear wall or cabinet • Available side clearance and front clearance • Existing seat height and whether low profile is required • Water supply line location and connection style • Whether the old toilet is gravity flush, macerating, cassette, composting, or portable Why this matters: RV toilets can look similar but still differ in rough-in clearance, water line position, seat height, bowl shape, base footprint, and service access.
Match this toilet by part number, toilet height, floor flange, rough-in, rear clearance, side clearance, water line location, and service access. Do not select by color or general appearance alone.
If toilet issues continue after installation, check water pressure, supply line fittings, flange seal, mounting hardware, flush ball seal, bathroom clearance, and floor condition before replacing additional components.
This toilet is intended for compatible RV gravity-flush sanitation systems only. Do not overtighten mounting hardware or water fittings, as damage or leaks may occur. Always shut off water pressure before installation or service, use proper sanitation procedures around the floor flange and holding tank opening, and winterize the toilet according to manufacturer and RV plumbing requirements when freezing temperatures are possible.