Replace a worn shank or add the shank your Equal-i-zer weight-distribution hitch head is missing. The 14-2950 is built from solid high-grade steel, dipped for corrosion resistance, and sized to give you 3" of drop or 7" of rise depending on how you orient it in a standard 2" receiver tube. Six mounting holes spaced in 1-1/4" increments let you dial in the exact coupling height for a level trailer ride.
Equal-i-zer weight-distribution hitch heads in the 6,000 to 14,000 lb. capacity range are sold without a shank, so you can pair them with the shank geometry that actually matches your tow vehicle and trailer combination. The 14-2950 is one of the most versatile shanks in the Equal-i-zer lineup: flip it for drop or rise, slide it through virtually any 2" receiver, and bolt on your hitch head using the six pre-drilled mounting holes.
This shank is also a straightforward upgrade path when you change tow vehicles. Rather than buying a whole new hitch system, swap the shank to match the new receiver height and keep your proven Equal-i-zer head in service.
Machined from solid high-grade steel billet -- not welded tube -- for consistent strength across the full shank body.
Provides 3" of drop or 7" of rise depending on orientation in the receiver, eliminating the need for two separate shanks.
Holes are centered and spaced at 1-1/4" increments, giving you multiple head-position options for precise ball height tuning.
Full-body dip coating seals the steel against road moisture, salt spray, and seasonal weather typical in RV towing conditions.
The 14-2950 is designed specifically for Equal-i-zer sway control hitch heads that ship without a shank -- primarily the 6,000, 8,000, 10,000, 12,000, and 14,000 lb. rated heads in the Equal-i-zer four-point sway control family. It inserts into any standard 2" receiver tube and accepts hitch head mounting hardware through the six bolt holes along the shank body.
The shank is also compatible with many other brands of adjustable hitch heads that use a comparable mounting-hole pattern. If you are running a different brand of weight-distribution head on a shankless design, confirm that your head's mounting hole spacing matches the 1-1/4" increment pattern before ordering.
Equal-i-zer hitch products, including this shank, are manufactured in the United States. The brand is known in the RV towing community for its integrated four-point sway and weight-distribution design, and replacement components like this shank carry the same build quality as the original hitch systems.