- White UV stable backing.
- Adhesive MicroSealant technology.
- Bonds to many materials including EPDM, TPO, Hypalon, fiberglass, and metal.
- Seal roof joints (seams) and tears, skylights etc.
- Seals for an air, moisture and water-tight barrier.
- One step permanent leak repair tape.
- Dimensions: 2" x 4' roll.
- Limited 25 year warranty.
- Made in USA.
Emergency RV Roof Repair Tape
Keeping a Mini Roll Of Eternabond's RV EMT around is extremely handy when you find yourself in a situation that calls for an emergency leak repair. Its the perfect answer to those quick fixes like window leaks, holding tank cracks, slide room repairs, and awning rips. The tape can even be used on tough repairs like pool liners, rubber boots, and expensive covers for boats. The mini 2" x 4' roll is the perfect size for conveniently storing in your tool box or kitchen drawer in the RV.
How It Works:
The RV EMT features a UV stable backing that is available in white. This is a one step permanent repair system for virtually all RV roof types, roof accessories and much more. It creates a waterproof, moisture, and air tight barrier with no additional sealing required and remains flexible to temperatures as low as -70 degrees F making it virtually impossible to thermally shock the seam causing a leak.
How To Apply:
By using MicroSealant Technology this emergency tape will form a strong bond, stopping leaks in just about any surface. Before applying, the surface must be clean and dry, you can use the Eternaclean for an easy clean up. For application, install over the repair area, removing the protective liner as you go, to prevent the tape from getting stuck to itself or debris. Using pressure, rub with hand or roll with steel roller to activate bonding process.
Adhesion: 20lbs+/in width
Application temperature: 150°F to -20°F ambient
Elongation: >700% +/- 100
Low temperature flexibility: ½” radius at -30°F
Permanence: .001 perms maximum
Pliability: No cracks in membrane
Shelf Life: Up to 5 years
Roll size: 2” X 4’
Temperature flexibility range: -70°F - >200°F
Tensile break PSI: 4500 PSI +/- 500 PSI
Total thickness: 65 mils (+/- 2 mils)
Water vapor test (ASTME 96B): .005 grms/100” sq./24hrs/100°F