 |
- MicroSealant Technology.
- Bonds to surfaces and stops leaks.
- Bonded to a woven polyester backing for maximum conformability
- Use on: EPDM, TPO, CSPE/Hypalon, most PVC, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, plus all metal roofs, tiles, shingle, aluminum, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.
- Seals roof tears, seams, flashings, copings, skylights, gutters, and much more.
- Can be applied in weather as cold as -20 degrees.
- Remains flexible to temperatures as low as -70°F
- Seals for an air, moisture and water-tight barrier.
- Perfect for repairing and restoring roofs on mobile homes and RVs.
- Use Eternabond UV protector to protect RV roof from harmful UV rays.
- Dimensions: 4" width, 25' length.
- Limited 15 year warranty.
- Made in USA.
Webseal 4" x 25' Sealant
This leak repair tape is perfect for use on tears in the roof or seams, flashings, copings, skylights, gutters and much more. It can be used for repairs or to restore the roof on your motor home and RV. If you're looking for a sealant, that will completely seal off any leak and last for a long period of time, the Eternabond Webseal would work great for you. With this tape you can make the repair yourself, it is quick, easy and can be applied in temperatures as low as -20 degrees.
Stops Leaks And Makes A Water-Tight Seal
The EternaBond WebSeal 4" x 25' has a woven backing coated with advanced MicroSealant. It is easy to work with and very flexible, forming around almost anything, with the ability to stick to itself to make the perfect seal to stop leaks. It is used on virtually all roofs and makes an air, moisture and water-tight barrier. The types of surfaces it can be used on are EPDM, TPO, CSPE/Hypalon, most PVC, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, plus all metal roofs, tiles, shingle, aluminum, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc. How To Apply
Webseal is very simple to use, before application, be sure the surface is cleaned, with any non-residue cleaner, for example acetone or lacquer thinner. You must get rid of any loose debris on the surface! Once that is done then you can begin applying the tape gradually, releasing the protective liner as you go along to make for a smooth bond. After it is laid out, use your hand or a roller to apply pressure to activate the bonding process. Last Webseal does not have UV protection, apply a coat of Eternabond UV Protector to enhance the life of the sealed surface.
Technical Specs
Adhesion: 19lbs+/in width
Application temperature: 150ºF to -20ºF ambient
Color: Grey
Elongation: >500%
Flexibility: ½" radius at -30ºF
Flexibility Temperature Range: -70ºF to >200ºF
Pliability: No cracks in membrane
Shelf Life: Up to 5 years
Roll Size: 4" x 25'
Total thickness: 30 mils (1mm)
Water vapor test (ASTME 96B): .005 grms/100" sq./24hrs/100ºF
Application & Warranty
|
RV Roof Repairs
|
Roof Repairs
|
Other Repairs
|
|
|
|
