Home > Electrical > RV Surge Protection >

Hughes Autoformers RSP-30-PWD Replacement Surge Protector for 30-Amp RV Power Defense

Hughes Autoformers RSP-30-PWD Replacement Surge Protector for 30-Amp RV Power Defense
Hughes Autoformer Replacement Surge Protection Module For 30 Amp Power Watchdog
 
List Price: $38.95
: $27.49
You save $11.46!
Part Number: RSP-30-PWD
Manufacturer: Hughes Autoformer
UPC #: 850034363080

Quantity in Stock :8

Availability: In Stock
Qty:

 
Hughes Autoformers 30-Amp Surge Protection Hughes Autoformers RSP-30-PWD -- Replacement Surge Protector for 30-Amp RV Shore Power

When your Hughes Autoformers surge protector has taken a hit or worn out over seasons of campground use, you do not need to replace the entire power management system. The RSP-30-PWD is the factory-matched replacement surge protection module for Hughes 30-amp power defense products, letting you restore full protection quickly and affordably without rewiring or swapping out your existing setup.

Restore Your Shore Power Protection Without Starting Over

Hughes Autoformers built their 30-amp Power Watchdog and power defense products around a modular design philosophy -- the surge protection element is a discrete, replaceable component. The RSP-30-PWD is that replacement module. If your unit has absorbed a surge, a nearby lightning strike, or simply logged years of campground voltage swings, swapping this module brings your system back to factory-spec protection without the cost or hassle of a full replacement unit.

At just 0.25 lbs and measuring 5.5 x 4.6 x 1.7 inches, this is a compact, straightforward swap. Keep one in your parts bin as a road spare -- surge events rarely give advance notice, and a damaged protector left in line offers no protection at all.

Factory-Matched Replacement

Designed specifically for Hughes Autoformers 30-amp power defense products. No modifications or adapters required -- direct plug-in swap.

30-Amp Shore Power Protection

Rated for standard 30-amp RV shore power connections, the type found at the majority of campground pedestals and RV parks across North America.

Compact Road-Spare Size

At 5.5 x 4.6 x 1.7 inches and only 0.25 lbs, the RSP-30-PWD stows easily in your RV tool kit or electrical supply bin for emergency swaps on the road.

Extends System Life

Replacing only the surge module preserves your existing Hughes power management investment. The base unit, wiring, and monitoring components remain in place.

Why Surge Protectors Need Replacement

Surge protection in RV shore power applications is not a passive, indefinitely durable feature. Metal oxide varistors (MOVs) and other surge-suppression components absorb energy during voltage events -- and they have a finite capacity. After absorbing one large surge or a cumulative series of smaller spikes, the protection circuitry degrades. A visually intact protector can be electrically exhausted and offer zero actual protection to your RV's electronics, appliances, and power converter.

The Hughes RSP-30-PWD restores the consumable surge-absorption element of the system. If your unit has indicated a fault, tripped after a nearby lightning strike, or has simply been in heavy use for multiple seasons, replacement is the correct action -- not just resetting or ignoring the indicator.

Modular Design Advantage: Hughes Autoformers engineered their Power Watchdog line so the surge module can be replaced independently. This means your investment in the base power defense unit -- which handles voltage monitoring, auto-connect/disconnect logic, and amperage management -- is preserved. You replace only what has been consumed.

Compatibility and Fitment

The RSP-30-PWD is the replacement surge module for Hughes Autoformers 30-amp power defense and Power Watchdog products. This includes the PWD30-EPO and related Hughes 30-amp smart power management units that accept a removable surge protection cartridge or module.

  • Designed for Hughes Autoformers 30-amp Power Watchdog / Power Defense products
  • Fits RVs with standard 30-amp TT-30 shore power connections
  • Compatible with Class A, Class B, Class C motorhomes on 30-amp service
  • Compatible with travel trailers, fifth wheels, and toy haulers wired for 30-amp
  • Not intended for 50-amp RV systems (separate RSP-50 model exists for those applications)
30-Amp vs. 50-Amp: Verify your RV's shore power configuration before ordering. The RSP-30-PWD is for 30-amp TT-30 systems only. If your rig has a 50-amp service (NEMA 14-50 plug), you need the Hughes 50-amp replacement module instead. Your shore power cord plug is the easiest way to confirm -- a 30-amp cord has a single round ground pin and two angled blades (three prongs total).

Installation Overview

Replacement of the RSP-30-PWD module follows the standard Hughes Autoformers procedure for surge module swap-out on the Power Watchdog line. The process does not require special tools or electrical trade knowledge, but you should always disconnect from shore power and confirm the system is de-energized before handling any part of your shore power protection equipment.

  • Disconnect the RV from shore power completely before beginning
  • Remove the exhausted or damaged surge module from the base Hughes unit
  • Install the RSP-30-PWD in its place, ensuring positive engagement/locking
  • Reconnect to shore power and verify normal operation indicators
Maintenance Tip: After any significant electrical storm, or if your Hughes unit has indicated a fault or disconnected unexpectedly, inspect the surge module before assuming the base unit has failed. In many cases, the module has simply done its job -- absorbed the surge -- and a module replacement is all that is needed to restore full functionality.
Consider Keeping a Spare: Full-timers and frequent travelers often carry an RSP-30-PWD as a road spare alongside a spare shore power cord. Campground power quality varies widely; having the ability to restore protection the same day rather than waiting on a shipped replacement can make the difference between a comfortable stay and a costly appliance repair.

Physical Specifications

ManufacturerHughes Autoformers
Part NumberRSP-30-PWD
UPC850034363080
Length5.5 in
Width4.6 in
Height1.7 in
Weight0.25 lbs

Electrical Compatibility

Shore Power Amperage30-Amp
Connector TypeTT-30 (30-amp RV standard)
System Voltage120V AC, single phase
ApplicationRV shore power surge protection

Fitment / Compatibility

Compatible Base UnitHughes Autoformers Power Watchdog 30-amp series
Shore Cord Plug TypeNEMA TT-30 (3-prong, 30-amp)
RV ClassesClass A, B, C motorhomes; travel trailers; fifth wheels (30-amp service)
Not Compatible With50-amp (NEMA 14-50) RV systems

What Is Included

In the Box1x RSP-30-PWD replacement surge protection module
Not IncludedBase Hughes power defense unit, shore power cord, adapters

Product Series Context

Product FamilyHughes Autoformers Power Watchdog / Power Defense
Role in SystemReplaceable surge-absorption module (consumable element)
50-Amp EquivalentHughes RSP-50-PWD (sold separately)
Important Information
  • This is a replacement module only -- it does not function as a standalone surge protector. A compatible Hughes Autoformers 30-amp Power Watchdog base unit is required.
  • Always disconnect from shore power and confirm the system is completely de-energized before removing or installing any surge protection module.
  • The RSP-30-PWD is rated for 30-amp TT-30 shore power only. Do not attempt to use this module in a 50-amp system.
  • A surge module that has absorbed a large voltage event may appear physically undamaged. Visible condition is not a reliable indicator of remaining protection capacity -- replace on schedule or after any known surge event.
  • This product is designed for RV shore power applications. It is not intended for residential electrical panels or non-RV applications.


Browse for more RV Accessories in the same category as this item:

Electrical > RV Surge Protection
Electrical


$14.99
$11.49
$88.99
$34.99