Clamp your Kuuma grill to the cockpit rail and grill outboard of the boat -- keeping heat, drips, and grease away from your fiberglass. Fits 7/8" to 1-1/4" O.D. round horizontal rails and 1-1/4" square rails. Built from rust-resistant anodized aluminum with all mounting hardware included.
The Camco Kuuma 58182 is a purpose-built cockpit rail grill mount designed specifically for use with Kuuma marine grills. The two-piece clamp assembly bolts securely around your horizontal cockpit railing and extends the grill outboard of the boat, so flare-ups, grease drips, and condensation never touch your gel coat or fiberglass deck surfaces.
Constructed from anodized aluminum, this mount resists corrosion in saltwater and freshwater environments alike. The compact 9" x 2" x 2-1/2" profile keeps the mount low-profile on the rail, and the included hardware means you can install it without a trip to the hardware store. Compatible with all current Kuuma grill models.
Adjusts to fit 7/8" through 1-1/4" O.D. round horizontal rails, and accepts 1-1/4" square tubing as well -- covers most production powerboat and sailboat cockpit rails.
Holds the grill outside the rail perimeter so heat, steam, and grease drips go overboard -- not onto your upholstery, deck, or gel coat.
Anodized finish resists oxidation, salt spray, and UV without painting or coating maintenance -- stays presentable season after season.
All mounting bolts, nuts, and clamp hardware ship in the box. No separate hardware kit required for a basic rail installation.
The 58182 mount is compatible with the full Kuuma grill lineup, including the Profile 150, Profile Plus 216, and stainless Kuuma grills. The mounting receiver accepts the standard Kuuma grill post, so no adapters are needed when pairing with a Kuuma unit.
The clamp assembly wraps around the horizontal rail section from above. Tighten the stainless clamp bolts with a standard wrench to lock the mount in position. The grill post then drops into the mount receiver and is secured per the grill's own locking mechanism. No drilling into fiberglass or wood is required.
This mount is designed for horizontal rail sections only. It is not intended for vertical stanchions or angled rail runs. Verify your cockpit rail includes a suitable horizontal section in the 7/8" to 1-1/4" O.D. range before ordering. Square rail compatibility is limited to 1-1/4" square tubing.
The Kuuma 58182 mount is the dedicated rail mounting solution for the Kuuma marine grill family. If you own a Kuuma Profile 150 (58220), Profile Plus 216 (58221), or similar Kuuma stainless grill, this mount provides the correct receiver interface without modification. Check Camco's Kuuma accessory line for covers, carry bags, and propane adapter hoses sold separately.