When your RV slide-out motor fails or you need to manually retract a room before service, the Lippert 119144 gives you a direct, reliable way to operate your above-floor slide-out by hand. This 5-3/8 inch steel crank ships with the roll pin already included -- no hunting for hardware before you can get your rig road-ready.
Lippert slide-out systems power thousands of RVs on the road today, and when the motor or controller acts up, this manual crank is the backup that gets your slide retracted and your coach towable again. Part number 119144 is a direct replacement crank sized for above-floor Lippert slide systems requiring a 5-3/8 inch crank shaft.
The crank is machined from steel and finished with a zinc plating to resist corrosion in the outdoor environments RVers encounter. At 3 lbs., it is sturdy enough for real mechanical work without being awkward to store in a basement compartment or tool bag.
The securing roll pin ships with the crank -- no separate hardware order needed to complete the installation.
Machined steel body provides the torque capacity needed to manually drive a slide-out rack without bending or stripping.
Zinc plating protects against rust and corrosion from moisture and road exposure during storage and use.
Designed specifically for Lippert above-floor slide-out systems where the drive mechanism is mounted above the floor rail.
Above-floor Lippert slide-out systems use a rack-and-pinion or similar drive mechanism that can be engaged manually when the electric motor is bypassed. The 119144 crank interfaces with the drive shaft on the slide-out mechanism, allowing you to turn the room in or out by hand using the crank as a handle. The roll pin locks the crank onto the shaft so it does not slip under load.
This is not a universal crank -- it is sized and configured for the specific Lippert above-floor application that requires a 5-3/8 inch crank. Confirm your slide system and crank shaft size before ordering.
This crank is designed for Lippert above-floor slide-out systems that specify a 5-3/8 inch manual crank. Lippert produces several crank lengths for different slide-out configurations -- verify your existing crank length or consult your RV's slide-out service tag before ordering a replacement.