Lippert 2024121180 -- 20-Foot RV Sewer Hose Kit with Clear Elbow and Storage Caps
Everything you need to connect your RV waste tanks to a campsite sewer hookup or dump station. This kit ships ready to use -- no extra fittings to hunt down, no mystery about what hose length you are getting. The 25 mil wall thickness puts it in the heavy-duty tier, resisting punctures and odor permeation better than the thin 15 mil hoses bundled with many entry-level rigs.
Most RVers eventually retire the hose that came with their rig -- it cracks, thins out, or simply wasn't long enough to reach the dump station inlet. The Lippert 2024121180 replaces it with a proper 20-foot run of 25 mil hose, which gives you comfortable reach at most full-hookup campsites and dump stations without daisy-chaining two short hoses together.
The included clear elbow lets you watch flow at the connection point -- a small detail that matters when you are emptying black tanks and want to know when the tank is actually clear. Two storage caps (one for each end) keep the hose sealed between uses, which controls odor in your basement or bumper tube storage.
Heavy-duty thickness resists cracking, abrasion, and odor permeation better than standard 15 mil hoses.
Reaches most full-hookup sewer inlets without extensions. Eliminates the need to daisy-chain two short hoses.
Multi-fit clear elbow lets you see waste flow at the dump station connection so you know when the tank runs clear.
End caps seal both ends of the hose after use, controlling odor during storage in bumper tubes or basement compartments.
This is a complete, ready-to-use kit. Nothing else is required for a standard 3-inch RV sewer connection:
The transparent elbow at the dump station end is the fastest way to confirm your black tank has flushed completely. When the flow runs clear, you are done -- no guesswork, no unnecessary tank flushes wasting water.
The 25 mil wall is meaningfully thicker than the 15 mil hoses common in budget kits. Thicker walls resist the small rocks, pavement, and abrasion that wear through thin hoses during use and dragging. The ribbed, flexible construction allows the hose to bend around obstacles -- angled sewer inlet pedestals, curb edges, low walls -- without kinking or collapsing the flow path.
The orange color is industry-standard for sewer hoses, making it easy to identify and keep separate from freshwater equipment in storage.
The hose and fittings use the standard 3-inch RV bayonet-style connection common to virtually all North American RVs. The multi-fit clear elbow accommodates the most common dump station inlet sizes. If your campsite has a non-standard inlet, a separate adapter (such as a Lug-Style or Bayonet-to-Threaded adapter) may be needed -- those are sold separately.
A 20-foot hose stores well in a standard 4-inch RV bumper tube when compressed, or in a dedicated hose carrier bag in a basement compartment. Always cap both ends before storage to prevent residual odor from escaping into living areas. Rinse the hose with fresh water before storing to extend its service life.