Upgrade your RV entry with a fully automatic folding step that extends when the door opens and retracts when it closes -- no manual effort required. The Lippert 3691461 ships as a complete kit including the step assembly, control unit, and power switch, so you have everything needed to replace or install a powered entry step. Solid steel construction, a 300 lb weight capacity, and Made-in-the-USA build quality make this a long-term investment for any towable or motorized RV.
The 3691461 uses a 12V motor paired with a gearbox to extend and retract the step in sync with your RV door. When you pull up to a campsite and open the door, the step is already there. Close the door and it folds away cleanly, protecting it from road debris during travel.
The included power switch kit allows you to override automatic retraction and lock the step in the extended position -- ideal when you are parked and moving in and out of the rig frequently. An ignition override automatically retracts the step when the engine starts, so you cannot accidentally drive away with the step deployed.
Step extends with door open, retracts with door closed. Ignition override retracts the step when the engine starts.
Heavy-duty steel construction rated for 300 lbs, suitable for most adults with gear or pets.
Non-slip step surface with easy-to-see reflective strips reduces slip risk in wet or low-light conditions.
Hidden amber incandescent light (C193 bulb) illuminates the step area at night for safer entry and exit.
This is a complete replacement and new-installation kit. You receive:
Hardware and wiring connectors necessary for installation are typically included with the Lippert step kit. Verify mounting hole dimensions against your RV floor frame before ordering -- see the spec table for bolt pattern measurements.
The step frame and treads are solid steel with a black powder-coated finish that resists corrosion and road grime. Drive rods are steel; bushings are stainless steel for smooth, long-lasting operation in wet and dirty environments. The motor and gearbox are enclosed within the assembly for protection.
At 45 lbs, this is a substantial step. Plan accordingly for installation -- a second set of hands is recommended when positioning and bolting the unit to the RV frame.
The control unit uses color-coded wiring for straightforward connection to your RV's 12V system and door switch circuit:
Motor operates on 12V DC. The switch kit is rated for 250V (suitable for the low-current control circuit). Control unit draws up to 10A -- ensure your circuit is properly fused at or below this rating.