Genuine Lippert OEM replacement for a worn, broken, or damaged foot pedal on the Flow Max RV toilet. Includes foot pedal, torsion spring, retention screw, and foot pedal cover — all four components in one kit. Installs with basic hand tools. Compatible with Lippert Flow Max RV toilets only.
The foot pedal on the Lippert Flow Max RV toilet is a mechanical component that sees daily use — and over time, cracking, weakening springs, or general wear can cause it to stick, break, or lose its two-stage action. The 2025017815 Flush Pedal Replacement Kit is Lippert's own genuine OEM repair solution: a complete set of all four pedal components in one package, so a worn or damaged pedal can be fully restored rather than leaving the toilet out of service.
The kit replaces the entire foot pedal assembly — pedal body, torsion spring, retention screw, and decorative cover — exactly as specified in Lippert's official service bulletin TI-567. The Flow Max toilet's foot pedal operates in two stages: a half-press adds water to the bowl, and a full press activates the gravity flush. Restoring the spring tension and pedal action returns both functions to proper operation. Installation requires only a utility knife or pick tool and a flat-head screwdriver or 1/4" socket bit — no special tools needed.
All four components are genuine Lippert OEM replacements — exact fit for the Flow Max toilet, no aftermarket guesswork
Foot pedal, torsion spring, retention screw, and foot pedal cover all included — everything needed for a full pedal assembly replacement
Installs with a utility knife and flat-head screwdriver or 1/4" socket bit — no special tools or professional service required
Installation follows Lippert's official TI-567 service bulletin procedure for verified, manufacturer-specified repair steps
The 2025017815 Flush Pedal Replacement Kit is designed specifically for the Lippert Flow Max RV toilet (toilet model 2022113192 and related). It is not a universal fit for other RV toilet brands or models, including Dometic, Thetford, or other manufacturers' foot pedal systems. Before ordering, confirm: • Your toilet is a Lippert Flow Max (look for the Lippert or Flow Max branding on the toilet body) • Check the toilet's model number against Lippert's Flow Max product line — model 2022113192 is the elongated ceramic bowl version If you have a Dometic, Thetford, or other brand RV toilet, this kit will not fit your toilet's pedal design. Contact Lippert customer care at 574-537-8900 to confirm compatibility with your specific toilet before ordering.
The Lippert Flow Max toilet uses a two-stage foot pedal flush system: Half-Press (Water Fill): Pressing the foot pedal down approximately halfway opens the water valve, allowing water to flow into the bowl — useful for rinsing or pre-wetting before flushing. Full Press (Flush): Pressing the foot pedal all the way down activates the full gravity flush, sending bowl contents and water through the outlet valve into the black water tank. The torsion spring included in this kit is what provides the resistance and the two-stage action feel. If the pedal feels weak, spongy, or fails to return to the up position cleanly, a worn spring is often the culprit — and this kit replaces it along with the full pedal assembly.
Tools Needed: • Utility knife or pick tool • Flat-head screwdriver or 1/4" socket bit with extension Installation Steps: 1. Remove Foot Pedal Cover: Use a utility knife or pick tool at the edge of the foot pedal cover to pop it free from the pedal body 2. Remove Retention Screw: Locate the retention screw inside the foot pedal and remove it using the flat-head screwdriver or 1/4" socket bit with extension 3. Remove Old Foot Pedal: With the retention screw removed, slide or lift the foot pedal free from the toilet base 4. Install New Torsion Spring: Position the new torsion spring correctly in the mounting location per the service bulletin diagram 5. Install New Foot Pedal: Seat the new foot pedal assembly into the toilet base 6. Reinstall Retention Screw: Thread the new retention screw into the foot pedal and tighten securely 7. Snap on Foot Pedal Cover: Press the new foot pedal cover into place until it clicks securely 8. Test: Test both the half-press (water fill) and full-press (flush) actions before returning to service Refer to Lippert Service Bulletin TI-567 (CCD-0010511) for complete illustrated step-by-step instructions.
In The Kit (Part 2025017815): • (1) Foot Pedal — Part 2020221054 • (1) Torsion Spring — Part 2021106625 • (1) Retention Screw — Part 2021106614 • (1) Foot Pedal Cover — Part 2021106609 NOT Included: • Tools (utility knife, screwdriver) • Flow Max toilet (sold separately)
Lippert Customer Care: Phone: (574) 537-8900 Website: support.lci1.com Installation Documentation: Service Bulletin TI-567 (CCD-0010511) is available at support.lci1.com — search for "Flow Max Toilet Flush Pedal Replacement."