Home > Awning Sun & Shade > Awning Accessories >

Lippert Solera V000334360 Replacement RV Awning Vinyl Fabric 11ft 1in Burgundy Fade 13.5 oz

Lippert V000334360 Solera Replacement RV Awning Vinyl Fabric 11ft 1in Burgundy Fade 13.5 oz heat-welded seams
Lippert Solera Replacement RV Awning Vinyl Fabric, 11'1", Burgundy Fade
 
Alternative Views:


: $248.79
Part Number: V000334360
Manufacturer: Lippert
NOTE: Ships in 5 to 7 days

Quantity in Stock :

Free Shipping
Availability: Out of Stock
Qty:

 
Lippert Solera 13.5 oz Vinyl 5-Year Warranty Lippert Solera Replacement RV Awning Fabric -- 11ft 1in, Burgundy Fade

Give your RV's patio awning a fresh start with this factory-spec Lippert Solera replacement fabric. Built from 13.5 oz UV-resistant vinyl with heat-welded seams, this Burgundy Fade fabric is made to order for a precise fit on 12-foot Solera, Dometic, and Carefree awning assemblies -- without replacing the entire roller arm unit.

Purpose-Built Replacement, Not a Generic Cover

Worn, cracked, or sun-bleached awning fabric doesn't mean it's time for a whole new awning system. Lippert's Solera replacement fabrics are engineered to the same tolerances as the original factory-installed material, using the same 13.5 oz vinyl construction found on new Solera assemblies. This fabric slides directly onto your existing roller tube and attaches to the lead rail using the original hardware.

The 11ft 1in fabric width is intentionally cut approximately 11 inches narrower than the nominal 12-foot awning assembly width -- this is standard and correct for proper installation. The 8-foot projection gives full patio coverage, and the white underside reflects heat for a cooler outdoor experience.

13.5 oz Vinyl Construction

Heavy-duty woven vinyl fabric resists UV fading, mildew, and surface abrasion across seasons of outdoor exposure.

Heat-Welded Seams

Critical stress points are heat-bonded rather than stitched, eliminating needle holes where water infiltration typically begins.

Cold-Crack Tested to -25F

Fabric remains flexible and resists cracking in sub-zero temperatures, suitable for year-round use and cold-weather storage climates.

Light Track Ready

Includes an integrated poly cord channel along the lead rail hem so you can add an optional aftermarket LED light strip or light track without drilling.

Fits Your Existing Awning Hardware

This fabric is designed for use with Lippert Solera awning roller assemblies as well as compatible Dometic and Carefree 12-foot awning setups. It replaces the fabric only -- your existing roller tube, end caps, arms, and hardware are reused. If your roller assembly is damaged or missing, it will need to be sourced separately before installation.

Cross-Brand Compatibility: This replacement fabric is compatible with Solera (Lippert), Dometic, and Carefree 12-foot awning assemblies that accept a standard fabric slide-in installation. Verify your awning brand and nominal width before ordering.

Burgundy Fade Colorway

The Burgundy Fade pattern transitions from a deep red-burgundy tone along the outer edges to a lighter tint toward the center, giving your RV exterior a classic, finished appearance. The underside of the fabric is white on all Lippert Solera replacement fabrics, which helps reflect radiant heat downward and brightens the shaded area below the awning.

Light Track and LED Lights

The poly cord sewn into the hem of the lead rail allows for installation of a compatible aftermarket awning light track. The light track, LED light strip, and any mounting hardware are not included with this fabric and must be purchased separately. The cord channel is a convenience feature -- use of a light track is optional.

Sizing Note: Awning fabric is always listed by fabric width, which is approximately 11 inches shorter than the awning assembly's nominal width. A 12-foot awning assembly takes an 11ft 1in fabric. Always measure your existing fabric -- or the distance between the inside faces of your end caps -- before ordering.

Installation Overview

  • Remove the old fabric from the roller tube by releasing the spline or slide-in retention system on your awning model.
  • Slide the new fabric onto the roller tube and secure the hem rail into the lead bar channel.
  • Reattach end caps and verify fabric tension before extending the awning fully.
  • Two people are strongly recommended for fabric installation to avoid misalignment or creasing.
  • Roller assembly, arms, end caps, and mounting hardware are not included and must be reused from your existing awning.
Maintenance Tips: Clean vinyl awning fabric with mild soap and water -- avoid petroleum-based solvents or bleach, which degrade the vinyl coating. Always retract the awning before driving and during high winds. Allow fabric to dry fully before rolling up to prevent mildew growth.
Made to Order -- No Returns: Lippert Solera replacement awning fabrics are manufactured to order and are non-returnable and non-exchangeable. Measure your existing awning assembly carefully and confirm the correct fabric width before placing your order. Orders cannot be cancelled or modified once submitted.

Product Specifications

ManufacturerLippert Components
Product LineSolera Replacement Awning Fabric
Part NumberV000334360
UPC848150036995
ColorBurgundy Fade
Underside ColorWhite

Fabric Dimensions

Fabric Width11 ft 1 in (133 inches)
Awning Assembly Size12 ft (nominal)
Projection (Depth)8 ft
Width vs. AssemblyApprox. 11 in shorter than nominal assembly width -- this is correct and expected

Material and Construction

Fabric Weight13.5 oz vinyl
Seam ConstructionHeat-welded, leak-resistant
Cold-Crack RatingTested to -25 deg F
Light Track ChannelPoly cord included in lead rail hem (light track and lights not included)

Compatibility

Primary FitmentLippert Solera 12 ft awning assemblies
Also Compatible WithDometic and Carefree 12 ft awning assemblies (standard slide-in fabric installation)
Roller AssemblyNot included -- reuse existing hardware
Arms and HardwareNot included -- reuse existing components

Package Details

Shipping Weight12 lbs
What is IncludedReplacement fabric with poly cord light track channel
What is NOT IncludedRoller assembly, arms, end caps, light track, LED lights, mounting hardware
Order TypeMade to order -- non-returnable

Warranty

Manufacturer WarrantyLimited 5-year manufacturer warranty
Warranty CoverageDefects in materials and workmanship under normal use
Important Information -- Read Before Ordering
  • This fabric is made to order and cannot be returned or exchanged under any circumstances. Measure before you order.
  • Fabric width (11ft 1in) is approximately 11 inches shorter than the nominal 12-foot awning assembly width -- this is by design and correct for proper installation.
  • Roller assembly, awning arms, end caps, and mounting hardware are not included. Your existing hardware must be in serviceable condition before installing new fabric.
  • Light track and LED lights are not included. The poly cord is a mounting channel only.
  • Always retract and secure your awning before driving or in sustained winds above 20-25 mph to prevent structural damage.
  • Allow fabric to dry completely before rolling up to prevent mold and mildew growth on the vinyl surface.


Browse for more RV Accessories in the same category as this item:

Awning Sun & Shade > Awning Accessories
Awning Sun & Shade