Restore your RV's patio awning to like-new condition with this Lippert Solera factory-specification replacement vinyl fabric. Engineered to match the original dimensions, weight, and seam construction of Solera awnings, this fabric also cross-fits Dometic and Carefree awning systems of the same size. Burgundy Fade color on the face, white on the underside.
At 13.5 oz per square yard, this is genuine heavy-weight awning vinyl -- the same grade used in original equipment Solera assemblies. The face carries the Burgundy Fade pattern while the underside is finished in white, reducing heat transfer into your living space during sunny days.
Every seam is heat-welded rather than sewn, sealing the overlap against water infiltration at the points where conventional stitched fabrics typically fail first. The result is a patio surface that sheds rain cleanly and resists mildew growth at the seam lines.
Tested to -25F so the vinyl stays flexible and crack-free through cold-weather storage and early-season use.
Thermally fused overlaps eliminate needle holes and create a leak-resistant bond stronger than stitched seams.
A poly cord is pre-installed along the drop hem for an optional LED light track -- track and lights sold separately.
Made to the same spec as Solera OEM fabric and confirmed compatible with Dometic and Carefree 14 ft awning assemblies.
This fabric is sized for a 14 ft awning assembly. The cut fabric width is 13'1", which is approximately 11 inches shorter than the full 14 ft roller-to-bracket span. This is normal and intentional -- the fabric is not meant to span the full hardware width. Verify your awning assembly size, not just the fabric you are replacing, before placing your order.
Projection (how far the fabric extends out from the RV wall when fully deployed) is 8 feet, consistent with standard full-size RV patio awnings in the 14 ft class.
Lippert manufactures this fabric to fit the following awning systems when the assembly measures 14 ft:
If you are unsure of your awning brand, measure the roller tube length or check the label on the awning arm casting. The assembly size -- not the old fabric -- is what determines the correct replacement width.
Replacement awning fabric installs by feeding the fabric rail into the slot on the roller tube and securing the drop hem to the awning rail on the RV wall. No special tools are required beyond basic hand tools, though a second person makes the installation significantly easier when handling the full 14 ft span.