Give your rig's awning a like-new look without replacing the entire assembly. The Lippert V000334383 is a 13.5-oz vinyl replacement fabric sized at 14'1" wide with an 8-foot projection -- purpose-built for 15 ft. Solera, Dometic, and Carefree awning assemblies. Cold-crack tested to -25F and finished with heat-welded, leak-resistant seams, this fabric is built to handle seasons of sun, wind, and rain on the road.
Awning fabric takes a beating -- UV exposure, wind stress, rain saturation, and the repeated rolling and unrolling that comes with life on the road. Lippert engineered this Solera replacement fabric from 13.5-oz vinyl, a weight class that delivers real durability without the stiff, difficult-to-roll characteristics of heavier materials. The result is fabric that resists tearing at stress points, sheds water cleanly, and rolls smoothly on your existing assembly season after season.
The Black Fade color pattern provides a stylish gradient appearance on the exterior while the underside remains white -- keeping your patio space brighter and cooler when the awning is extended. A poly cord sewn into the leading edge accommodates an optional LED light track if you want to add lighting later.
Vinyl formula tested to -25F, so the fabric stays flexible and crack-resistant through harsh winter storage and early-season use.
Critical stress points are heat-welded rather than stitched, eliminating needle holes that can allow water infiltration over time.
Poly cord sewn into the leading-edge hem accepts an optional aftermarket LED light track -- no drilling or modification required.
White interior face reflects light under the awning, keeping your patio area cooler and more comfortable in direct sun.
Awning fabric is sized by its fabric width, which is always shorter than the overall awning assembly width. This 14'1" fabric is the correct replacement for a 15 ft. awning assembly. The approximately 11-inch difference accounts for the hardware, end caps, and roller tube that are not covered by the fabric itself.
This fabric has an 8-foot projection -- the depth the awning extends out from the RV wall when fully deployed. Standard for most Class A, Class C, fifth wheel, and travel trailer awning assemblies in the 14-15 ft. range.
This Lippert Solera fabric is designed to fit and replace fabric on the following awning brands and assembly types:
All three brands share a common fabric attachment system -- a bolt rope or bead that slides into the roller tube channel and a hook-and-eye or bolt-rope hem at the front bar. The Solera fabric uses this universal standard, making cross-brand replacement straightforward in most cases.
Replacing awning fabric is a manageable DIY project for most RV owners. The general process involves unrolling the existing awning, releasing the old fabric from the roller tube and the front bar, sliding the new fabric's rope hem into the roller tube channel, reattaching the front bar hem, and re-tensioning the assembly. Most replacements take 1-2 hours with a helper. Specific steps vary slightly between Solera, Dometic, and Carefree hardware -- refer to your awning assembly's documentation or Lippert's online resources for model-specific guidance.