Give your rig a fresh look and renewed weather protection with this factory-spec replacement fabric. Made-to-order from 13.5-oz heat-welded vinyl, it fits Solera, Dometic, and Carefree 10 ft. awning assemblies and cold-crack tested down to -25F -- so it flexes without cracking whether you're parked in the desert or a mountain campground in early spring.
Awning fabric takes a beating -- UV exposure, wind flap, rain pooling, tree sap, and road grime all degrade even quality vinyl over time. When your original fabric fades, tears, or develops leaks at the seams, replacing it is far more cost-effective than swapping the entire awning assembly. The Lippert V000334339 is engineered to drop into your existing roller tube and hardware without modification.
The Burgundy Fade colorway features a gradient pattern that conceals minor weathering between cleanings. The underside is white, which reflects heat downward and brightens your outdoor living space even on overcast days.
Heavy-duty vinyl resists UV degradation, mildew, and surface cracking through seasons of use.
Seams are heat-fused, not stitched, eliminating needle holes and reinforcing the fabric at high-stress points.
Fabric remains pliable and crack-resistant in extreme cold -- critical for full-timers and shoulder-season campers.
A poly cord channel is integrated along the valance for optional LED light track installation (light track sold separately).
This fabric is designed to replace the original fabric on a 10 ft. awning assembly. The cut fabric width is 9'1" -- approximately 11 inches shorter than the full awning assembly width. This is intentional and normal: the extra clearance allows the fabric to roll onto the tube and seat correctly inside the end caps. Do not order a fabric that matches the assembly width dimension exactly.
Compatible awning brands include Lippert Solera, Dometic, and Carefree 10 ft. manual and power awning assemblies that accept a standard rolled-end or round-tube fabric attachment. Always verify your roller tube diameter and end-cap attachment style before ordering.
The fabric delivers an 8-foot projection from the RV sidewall to the valance edge when the awning is fully extended. This is the usable shade depth and is fixed by the fabric cut -- it cannot be adjusted by changing the pitch angle. Plan your campsite setup accordingly if you need maximum shade on a specific side of your rig.
An integrated poly cord runs along the valance hem, creating a ready-made channel for an optional LED rope light or light track accessory. No drilling or additional hardware is required to add lighting -- simply thread a compatible light strip into the cord channel. The light track and LED lights are not included and must be purchased separately.