Home > Awning Sun & Shade > Awning Accessories >

Lippert V000334341 Solera Replacement RV Awning Vinyl Fabric 10ft 1in Black Fade 13.5 oz

Lippert V000334341 Solera Replacement RV Awning Vinyl Fabric 10ft 1in Black Fade 13.5 oz with heat-welded seams and poly cord light track
Lippert Solera Replacement RV Awning Vinyl Fabric, 10'1", Black Fade
 
Alternative Views:


: $248.79
Part Number: V000334341
Manufacturer: Lippert
NOTE: Ships in 5 to 7 days

Quantity in Stock :

Free Shipping
Availability: Out of Stock
Qty:

 
Lippert Solera13.5 oz VinylCold-Crack Tested to -25FLippert V000334341 Solera Replacement RV Awning Fabric -- 10'1" Black Fade

Give your RV patio awning a fresh start with this factory-grade Lippert Solera replacement vinyl fabric. Engineered to fit 11-foot awning assemblies from Solera, Dometic, and Carefree, this 13.5-oz vinyl fabric delivers durable UV and weather protection with heat-welded seams, a poly cord light track channel, and cold-crack resistance tested down to -25F -- built for real conditions, not just fair weather camping.

Purpose-Built Replacement Fabric for 11 ft. RV Awnings

When your existing awning fabric is faded, cracked, torn, or just worn out, replacing the fabric alone -- rather than the entire awning assembly -- is the most cost-effective upgrade you can make. The Lippert V000334341 is manufactured to the same standards as the original Solera awning fabric, so you get a like-for-like fit without compromise.

The Black Fade colorway features a gradated black exterior that transitions to a clean white underside, giving your campsite a sharp, finished look while keeping the interior of the awning bright and comfortable.

Heavy-Duty 13.5 oz Vinyl

Thick, commercial-grade vinyl construction resists tearing, fading, and UV degradation across seasons of use.

Heat-Welded Seams

Critical stress points are heat-welded rather than stitched, eliminating needle holes that can leak and seams that can unravel.

Cold-Crack Tested to -25F

Fabric remains pliable and crack-resistant at extreme cold temperatures -- safe to roll and unroll in winter or high-altitude conditions.

Poly Cord Light Track Included

A poly cord is sewn into the fabric for an optional LED light strip track. Light track and LED lights are sold separately.

Fitment and Sizing -- Read Before Ordering

This fabric is designed to fit an 11-foot awning assembly. The fabric width is 10 feet 1 inch -- approximately 11 inches shorter than the full awning assembly width. This is normal and expected: the fabric does not span the full width of the roller tube and arms; it fits between the end caps.

The awning fabric has an 8-foot projection (the distance the fabric extends outward from the side of the RV when fully deployed).

How to Measure Your Awning: Measure the existing fabric width, not the full arm-to-arm span of the awning assembly. Your measurement should come in close to 10'1" for this fabric to be the correct fit. When in doubt, remove the existing fabric and measure the roller tube between the end caps.

Compatible Awning Brands

This Lippert Solera replacement fabric is designed to fit leading OEM awning systems. Confirmed compatible platforms include:

  • Lippert Solera awning assemblies (11 ft. size)
  • Dometic awning assemblies (11 ft. size)
  • Carefree awning assemblies (11 ft. size)
Roller Assembly Not Included: This listing is for the replacement fabric only. The roller tube, end caps, arms, and hardware from your existing awning assembly are reused. If your roller or arms are damaged, those components are sold separately.

Underside Color and Light Track Detail

The exterior (top) surface is Black Fade vinyl. The underside is white, which reflects light back down into your campsite and keeps the shaded area noticeably brighter than a dark underside would. The sewn-in poly cord creates a channel along the lower hem of the fabric that accepts a standard RV LED awning light strip track (sold separately).

Installation Tip: When replacing the fabric, lay the new fabric on a clean flat surface before threading it into the roller slot. Warm weather (above 60F) makes the vinyl more pliable and easier to work with. Avoid forcing the fabric in cold temperatures even though it is cold-crack rated -- the rating refers to in-service use, not installation flexibility.

Warranty

Covered by a limited 5-year manufacturer warranty from Lippert against defects in materials and workmanship under normal use conditions.

Made to Order: This replacement fabric is manufactured to order in the specified size and color. Lead times may be longer than standard stocked items. Confirm your awning size and color choice carefully before placing your order.

Product Specifications

ManufacturerLippert Components
Part NumberV000334341
UPC848150036384
Product LineSolera Replacement Awning Fabric
Color / PatternBlack Fade (exterior), White (underside)

Fabric Dimensions

Fabric Width10 ft. 1 in. (10'1")
Awning Assembly Size (fits)11 ft.
Projection (depth)8 ft.
Note on WidthFabric is approx. 11 in. shorter than awning assembly width -- this is by design

Material and Construction

Fabric MaterialVinyl
Fabric Weight13.5 oz per square yard
Seam ConstructionHeat-welded for leak resistance
Cold-Crack RatingTested to -25 deg F
Light TrackPoly cord sewn in (light track and LEDs not included)

Weight and Warranty

Shipping Weight11 lbs
WarrantyLimited 5-Year Manufacturer Warranty

Compatibility

Fits Awning Size11 ft. assembly
Compatible BrandsLippert Solera, Dometic, Carefree
Roller Assembly RequiredYes -- existing roller reused (not included)

What Is Included

IncludedReplacement awning fabric with sewn-in poly cord
Not IncludedRoller assembly, end caps, arms, hardware, light track, LED lights
Important Information
  • Made to order -- non-returnable. This fabric is custom-produced in your specified size and color. Verify your awning size before ordering. Returns are not accepted once the order is placed.
  • Measure your existing fabric width (not arm-to-arm span) to confirm the 10'1" fabric width is correct for your awning.
  • This fabric fits an 11 ft. awning assembly. It will not fit correctly on assemblies of a different size -- do not attempt to stretch or trim to fit.
  • The roller assembly, arms, end caps, and all hardware are NOT included. Reuse your existing components.
  • Cold-crack rating of -25 deg F applies to in-service use. Install in warm conditions for best results.
  • Light track and LED lights are sold separately. The poly cord is included only as an anchor point for an optional light track.


Browse for more RV Accessories in the same category as this item:

Awning Sun & Shade > Awning Accessories
Awning Sun & Shade


$248.79