Give your RV's patio awning a fresh start with this heavy-duty 13.5-oz vinyl replacement fabric from Lippert. Engineered to fit 11-foot Solera, Dometic, and Carefree awning assemblies, this White Fade fabric delivers the weather resistance, seam strength, and cold-weather durability you need for full-season use -- without replacing the entire awning system.
Awning fabric doesn't last forever. UV exposure, wind stress, and years of camping trips eventually take their toll. Lippert's Solera replacement fabrics let you restore a worn or damaged patio awning using your existing roller assembly and hardware -- saving significant cost and labor over a full awning replacement.
Part number V000334342 is sized at 10 feet 1 inch wide with an 8-foot projection, making it the correct fabric for an 11-foot awning assembly. The fabric width runs approximately 11 inches shorter than the awning rail width -- this is intentional and standard across the Solera fabric line.
Heavy-duty vinyl fabric weight provides superior resistance to tearing, sagging, and UV degradation compared to lighter-weight alternatives.
Fabric remains pliable and crack-resistant in extreme cold -- critical for RVers who camp in shoulder seasons or store rigs in cold climates.
Seams are heat-welded rather than stitched, eliminating needle holes that can allow water infiltration at the awning's highest-stress points.
Includes a poly cord sewn into the hem for optional LED light strip installation. Light track and LED lights are sold separately.
This fabric is compatible with Solera, Dometic, and Carefree awning systems that accept standard replacement fabric on an 11-foot roller assembly. Always measure your existing awning before ordering.
Awning fabric is always sized approximately 11 inches shorter than the overall awning assembly width. An 11-foot (132-inch) awning assembly uses a fabric that measures 10 feet 1 inch (121 inches) across. This gap accommodates the end caps and roller hardware on each side. If your awning assembly measures 11 feet rail-to-rail, V000334342 is your correct fabric size.
This fabric delivers an 8-foot projection -- the distance the awning extends outward from the RV wall when fully deployed. That provides a generous shade footprint for a standard slideout or entry area setup. The underside of the fabric is white, offering a bright, clean appearance from inside the awning shade.
Replacement awning fabric is manufactured to order and cannot be returned once produced. Before placing your order, confirm your awning assembly width (rail to rail), the fabric projection you need, and that your existing hardware accepts standard replacement fabric. When in doubt, contact Lippert support with your awning model number.
This listing covers the fabric only. The roller tube assembly, end caps, and mounting hardware are not included. Installation involves threading the new fabric onto your existing roller tube and re-securing the lead rail. Most RV owners with basic mechanical comfort can complete this swap in 1-2 hours with a helper. The included poly cord feeds into the hem channel of a compatible LED light track accessory if you choose to add lighting later.