When your existing awning fabric tears, fades, or starts leaking at the seams, a full roller replacement is rarely necessary. The Lippert V000334363 is a direct-fit, made-to-order replacement fabric engineered for 12 ft. Solera awning assemblies -- and cross-compatible with Dometic and Carefree awnings of the same size. Heavy-duty 13.5-oz vinyl construction with heat-welded seams and cold-crack resistance down to -25F keeps your patio shade reliable across seasons.
The V000334363 is designed to drop into your existing 12 ft. awning roller assembly without modification. At 11'1" wide -- approximately 11 inches shorter than the full awning assembly width, which is standard -- the fabric seats correctly in the end caps and wraps cleanly on the roller tube. The 8-foot projection (depth from wall to lead rail) provides full patio coverage for most Class A, Class C, fifth wheel, and travel trailer setups.
The exterior face is Silver Fade, a popular two-tone colorway that transitions from a deeper silver-gray to a lighter tone across the projection. The underside is white, which reflects light back onto the patio and keeps the area noticeably brighter on sunny days. A sewn-in poly cord runs the length of the lead rail hem for an optional LED light track -- the cord is included, the light track and lights are not.
Heavy-duty vinyl weight handles UV exposure, wind flutter, and repeated rolling without cracking or delaminating over time.
Factory-tested for low-temperature flexibility so the fabric won't crack or split during cold-weather storage or early-season deployment.
Critical seam points are heat-welded rather than sewn, eliminating needle holes and reducing the primary failure points where leaks typically start.
Engineered to fit Solera, Dometic, and Carefree 12 ft. awning assemblies -- three of the most common OEM awning brands on the road.
Getting the correct size before ordering is critical -- this fabric is made to order and cannot be returned. Measure your existing fabric, not your awning assembly. The rule of thumb for Solera, Dometic, and Carefree awnings: the replacement fabric width will measure approximately 11 inches less than the labeled awning size. A 12 ft. awning takes an 11'1" fabric. If your current fabric is worn and difficult to measure, measure the roller tube end-to-end (inside the end caps) and subtract roughly 1 inch per side.
The following are not included and must be reused from your existing assembly or purchased separately:
The 13.5-oz vinyl is UV-stabilized to resist color fade and surface degradation from prolonged sun exposure. Heat-welded seams prevent water infiltration at the highest-stress points of the fabric. Cold-crack testing at -25F confirms the material remains pliable in freezing conditions rather than becoming brittle -- an important consideration for RVers who store in cold climates or camp in early spring and late fall.
Lippert backs this fabric with a limited 5-year manufacturer warranty against defects in materials and workmanship -- one of the longer coverage periods in the replacement awning fabric category.