Restore your patio awning with a direct-fit replacement fabric engineered for Solera, Dometic, and Carefree 13 ft awning assemblies. This 13.5-oz vinyl fabric delivers heavy-duty weather resistance, cold-crack protection down to -25F, and heat-welded seams that hold up through seasons of UV exposure, wind, and rain -- all backed by a limited 5-year manufacturer warranty.
Worn, faded, or torn awning fabric doesn't just look bad -- it compromises shade coverage and can allow water intrusion into the awning roller assembly. The Lippert V000334368 is a made-to-order replacement fabric cut to 12'1" wide (approximately 11 inches shorter than your full awning assembly width, which is normal) with an 8-foot projection depth. It ships ready to install on your existing roller tube and awning arms.
The solid black colorway runs through both the topside and underside of the fabric, giving you a clean, uniform appearance from any angle. Whether you are replacing sun-damaged fabric on a full-time rig or refreshing a weekend warrior setup, this fabric restores full function without requiring a complete awning replacement.
Heavy-gauge vinyl resists puncture, tearing, and UV degradation better than lighter fabrics. Holds shape and color through extended outdoor exposure.
Factory-tested for flexibility in extreme cold. Will not become brittle or crack when rolled and unrolled in freezing temperatures -- important for shoulder-season camping.
Critical stress points along the seams are heat-welded rather than stitched, eliminating needle holes that could allow water infiltration and seam separation over time.
Includes a poly cord sewn into the leading edge for optional LED light track compatibility. Light track and LED lights are sold separately.
This fabric is engineered to fit Lippert Solera awning assemblies and is also compatible with Dometic and Carefree 13 ft awning systems that use the same roller tube diameter and attachment method. If your awning assembly measures 13 ft rail to rail, this 12'1" fabric is the correct replacement width.
Replacement awning fabric is always cut approximately 11 inches narrower than the stated awning assembly length. A 13 ft (156") awning assembly uses a fabric that is 12'1" (145") wide. This is by design -- the extra space accommodates the end caps, roller tube hardware, and awning arms at each side. Do not order a fabric that matches your rail-to-rail measurement exactly.
Solera replacement fabrics are manufactured to the ordered size and color and cannot be returned once produced. Before placing your order, measure your existing fabric from end to end (not rail to rail) and confirm your projection depth. Match that fabric measurement -- not the assembly measurement -- to the size listed here.