Give your rig's awning a full refresh with this direct-replacement vinyl fabric designed for 15-foot Solera, Dometic, and Carefree awning assemblies. At 13.5oz per square yard, this fabric is built to handle repeated outdoor exposure -- cold-crack tested to -25F and seamed with heat-welded bonds that resist leaks at the most stress-prone points. The White Fade colorway delivers a clean, classic look with a white underside for a bright outdoor living space.
Worn, torn, or sun-damaged awning fabric doesn't just look bad -- it lets in rain and reduces your usable outdoor space. This Lippert Solera replacement fabric is made to order in the exact width and projection your 15-foot awning needs, so you get a proper fit without improvising.
The fabric width of 14'1" is intentional: replacement awning fabric is designed to be approximately 11 inches shorter than the full awning assembly width, allowing for proper roller tension and end cap clearance. The 8-foot projection gives you the same coverage depth as the original equipment.
Factory tested to -25F so the fabric stays pliable and won't crack or split in cold-weather storage or early-season use.
Seams are bonded with heat rather than stitched, creating a leak-resistant joint that won't unravel or wick water through needle holes.
Made to fit Solera, Dometic, and Carefree awning assemblies -- the three most common brands found on production RVs today.
Includes a poly cord sewn into the valance for an optional LED light track. Light track and LED lights are sold separately.
This fabric is made to order and is non-returnable. Confirming your awning size before placing your order is essential. The standard method is to measure the awning assembly width from end cap to end cap -- this fabric is designed for a 15-foot (180-inch) awning assembly. The fabric itself measures 14'1" wide (approximately 11 inches shorter than the assembly) to allow for proper fit on the roller tube.
This fabric is compatible with the following awning systems commonly found on travel trailers, fifth wheels, and Class A/C motorhomes:
Replacing awning fabric on a Solera-style awning is a two-person job. The basic process involves removing the old fabric from the roller tube spline channel, sliding the new fabric's spline into the channel, and re-rolling under tension. The valance end attaches via the front rail spline. No special tools are required beyond basic hand tools, though a helper is strongly recommended to manage fabric alignment and roller tension.
The White Fade colorway features a gradient fade pattern on the outer (weather-facing) surface, with a solid white underside. The white underside reflects light downward into your patio space, making it feel brighter even on overcast days. Lippert offers this fabric in multiple colors and sizes -- confirm this listing matches your preferred color and awning size before ordering.