Restore your slide-out or patio awning with factory-quality replacement fabric purpose-built for Solera awning systems. This 13.5-oz vinyl fabric fits 20-foot awning assemblies, installs with your existing roller hardware, and is cold-crack tested to -25F so it handles four-season camping without becoming brittle or cracking in cold climates.
The Lippert Solera V000334440 is a direct replacement awning fabric designed to work with Solera, Dometic, and Carefree awning roller assemblies on 20-foot awning setups. At 13.5 ounces per square yard, this fabric is substantially heavier than entry-level replacement options, delivering better UV resistance, tear resistance, and long-term dimensional stability.
The top surface is Burgundy Fade -- a rich, fade-resistant color with a gradient pattern common on Solera fabric lines. The underside is white, which reflects heat and keeps the shaded area noticeably cooler on sunny days. Heat-welded seams run the full length of the fabric at critical stress points, eliminating stitched seams that can wick water or fail under load.
Vinyl stays pliable and crack-resistant in freezing temperatures -- important for shoulder-season campers who don't store in mild climates.
Seams are fused under heat and pressure rather than stitched, preventing water infiltration and reinforcing the fabric at high-stress transition points.
An integrated poly cord runs along the front valance, providing an optional mounting point for an aftermarket LED light track (track and lights sold separately).
The white interior surface reflects solar radiation back upward, reducing heat buildup under the awning and making outdoor living more comfortable in direct sun.
This fabric is sized for a 20-foot awning assembly. The fabric width of 19'1" is intentional -- replacement awning fabric is typically cut approximately 11 inches shorter than the nominal awning width to allow for proper fit within the roller tube end caps and fabric rail. Do not order based on fabric width alone; order based on your awning assembly size (20 ft).
Compatible awning brands and systems include:
This fabric provides an 8-foot projection -- the depth of coverage from the RV wall to the front valance when the awning is fully extended. An 8-foot projection is the standard depth for most full-size Solera and comparable patio awnings, providing adequate shade for a patio table-and-chairs setup alongside a typical Class A, Class C, or fifth wheel.
Replacement awning fabric installation on Solera-style systems typically involves extending the awning fully, removing the existing fabric from the roller tube and fabric rail (or rafter), sliding or rolling the new fabric into position, and securing it into the front valance rail. Most DIY installations can be completed with basic hand tools in 1 to 2 hours with two people. It is strongly recommended to install on a calm day to avoid wind complications during the process.