Three wide, non-slip steps in a compact folding package. The Lippert Hickory Triple Steps bolt onto your RV entry and fold down with one hand, giving you a stable, 24-inch-wide platform with a 9-inch rise per step. Heavy-duty powder-coated steel and a self-locking travel mechanism make these a dependable long-term upgrade over OEM folding steps on Class A, Class C, and fifth-wheel coaches.
Entry steps are one of the most-used components on any RV, and worn or under-sized steps are a genuine safety hazard. The Lippert Hickory Triple Steps address that with a 24-inch-wide tread surface -- noticeably wider than many OEM steps -- and machined non-slip grooves that shed mud, rain, ice, and snow instead of collecting it. The powder-coated steel frame resists corrosion through seasons of outdoor exposure.
The pivotal folding action collapses all three steps into a compact stack with one hand. A built-in self-locking mechanism secures the steps in the retracted position while driving, eliminating rattle and preventing accidental deployment. Deployment is equally simple: one motion drops all three steps into the locked-open position.
Unique pivotal action deploys or retracts all three steps with a single hand. No bending down, no secondary latches to release.
Machined channels channel water and debris away from the stepping surface, maintaining grip in wet, muddy, or icy conditions.
Steps lock securely in the folded position for transit, preventing road vibration rattle and accidental drop-down while driving.
Mounts using a standard 26" W x 7" D center-to-center hole pattern. Hardware included. No welding or custom fabrication required.
The frame and step pans are fabricated from heavy-duty steel and finished with a black powder-coat that resists chipping, fading, and rust. At 55 lbs, these steps are substantial -- that weight reflects the thick-gauge steel used throughout, not added filler. The result is a step assembly that does not flex or rack underfoot even at the rated 300 lb load limit.
These are universal bolt-on steps intended for RVs that use a standard step mounting bracket with a 26-inch wide by 7-inch deep center-to-center hole pattern. Common applications include:
The 9" drop (rise per step) suits coaches where the entry floor sits significantly above ground level. If your existing three-step unit has shallower or taller risers, measure before ordering -- Lippert offers the Hickory line in multiple drop configurations.
Installation is a bolt-on process using the included hardware. The steps mount to the existing step hanger bracket on the RV frame. Most installs require basic hand tools and take 30-60 minutes. No drilling or welding is needed when replacing a same-pattern step unit.