Home > Awning Sun & Shade > Awning Accessories >

Lippert Solera V000334369 Replacement RV Awning Vinyl Fabric 12ft 1in Burgundy Fade 13.5-oz

Lippert Solera V000334369 replacement RV awning vinyl fabric 12 foot 1 inch Burgundy Fade 13.5-oz with heat-welded seams
Lippert Solera Replacement RV Awning Vinyl Fabric, 12'1", Burgundy Fade
 
Alternative Views:


: $248.79
Part Number: V000334360
Manufacturer: Lippert
NOTE: Ships in 5 to 7 days

Quantity in Stock :

Free Shipping
Availability: Out of Stock
Qty:

 
Lippert Solera13.5-oz Vinyl5-Year WarrantyLippert Solera Replacement RV Awning Fabric -- 12'1", Burgundy Fade

Give your RV awning a fresh start with this factory-spec replacement fabric from Lippert. Designed to fit Solera, Dometic, and Carefree 13-ft awning assemblies, this 13.5-oz vinyl fabric brings back full shade coverage with the durability and finish quality of the original -- at a fraction of the cost of a full awning replacement.

Heavy-Duty Vinyl Fabric Built for the Long Haul

Lippert engineered this replacement fabric for RV owners who want a direct-fit solution without sacrificing quality. The 13.5-oz vinyl construction is thick enough to handle UV exposure, wind stress, and repeated roll-up cycles while staying flexible in cold weather down to -25F.

The Burgundy Fade colorway features a rich gradient finish on the exterior with a clean white underside -- a classic combination that complements a wide range of RV exteriors and keeps the interior of your awning space bright. The poly cord sewn along the leading edge supports an optional LED light track if you want to add ambiance without buying an entirely new awning (light track and LEDs sold separately).

13.5-oz Vinyl Construction

Heavy-duty vinyl resists UV degradation, mildew, and tearing through seasons of regular use.

Cold-Crack Tested to -25F

Fabric stays pliable and crack-free in freezing temperatures, making it suitable for four-season and shoulder-season camping.

Heat-Welded Seams

Critical stress points are sealed with heat-welded seams rather than stitching, eliminating water infiltration at the seams.

Poly Cord Light Track

Built-in poly cord along the valance allows an optional aftermarket LED light track to be added without modifications.

Fitment and Sizing -- Measure Before You Order

This fabric has a listed width of 12'1" and is designed for a 13-ft awning assembly. This is normal and expected: replacement fabric is always ordered approximately 11 inches shorter than your awning's overall width to account for the roller tube hardware on each end. Ordering by your awning assembly width (13 ft) -- not the bare fabric measurement -- ensures a correct fit.

How to Measure Your Awning:
  • Measure the total width of your awning assembly from the outer edge of one end cap to the outer edge of the other end cap.
  • That measurement (13 ft for this fabric) is the size you order -- not the bare fabric width.
  • Do not measure the old fabric itself, as worn or stretched fabric gives inaccurate readings.

Compatible Awning Brands and Systems

This fabric is made to the spec used across the three most common manual and electric patio awning platforms found on travel trailers, fifth wheels, and Class A and C motorhomes:

  • Lippert Solera manual and electric patio awnings
  • Dometic (A&E) 8500, 9000, and related series patio awnings
  • Carefree of Colorado patio awning systems

Compatibility spans a wide range of awning hardware generations. The key is matching the awning assembly width (13 ft) and confirming your current fabric uses a similar roller-tube and pull-strap or motor attachment system.

What Is Included:
  • One replacement vinyl awning fabric panel, 12'1" wide x 8' projection
  • Integrated poly cord for optional LED light track installation
What Is NOT Included:
  • Roller tube assembly -- reuse your existing roller
  • Awning arms, hardware, or end caps
  • LED light track or lights
  • Installation tools or hardware

Installation Overview

Replacing the fabric on a Solera, Dometic, or Carefree patio awning is a two-person job that typically takes 1 to 2 hours. The process involves removing the old fabric from the roller tube and rafter arms, sliding the new fabric into the roller channel, and re-tensioning. No specialized tools are required beyond basic hand tools. Fabric replacement does not require removing the awning arms from the RV wall.

Maintenance Tips to Extend Fabric Life:
  • Always retract the awning before driving or when leaving the campsite unattended.
  • Allow the fabric to dry fully before rolling up to prevent mildew growth.
  • Clean periodically with mild soap and water -- avoid harsh solvents or bleach.
  • Retract or de-tension the fabric during high winds to prevent stress on seams and roller hardware.

Fabric Specifications

Part NumberV000334369
UPC848150037008
Fabric Width12 ft 1 in (fits 13 ft awning assembly)
Projection (Depth)8 ft
Fabric Weight (Material)13.5 oz vinyl
Shipping Weight13 lbs
Color -- ExteriorBurgundy Fade
Color -- UndersideWhite

Performance Ratings

Cold-Crack Test Rating-25 deg F
Seam ConstructionHeat-welded (leak-resistant)
UV ResistanceYes -- UV-inhibited vinyl

Fitment Reference

Awning Assembly Width13 ft
Compatible -- LippertSolera manual and electric patio awnings
Compatible -- DometicA&E 8500 series, 9000 series patio awnings
Compatible -- CarefreeCarefree of Colorado patio awning systems
Roller Tube IncludedNo -- reuse existing roller assembly

Warranty and Order Policy

WarrantyLimited 5-Year Manufacturer Warranty
Made to OrderYes -- non-returnable once ordered

Light Track Compatibility

Poly Cord IncludedYes -- integrated into valance hem
Light Track IncludedNo -- sold separately
LED Lights IncludedNo -- sold separately
Important Information -- Read Before Ordering
  • This fabric is made to order and cannot be returned once the order is placed. Verify your awning assembly width before ordering.
  • Order by your awning assembly width (13 ft), not by the bare fabric measurement. Fabric will arrive approximately 11 inches shorter than the assembly width -- this is correct and by design.
  • Roller tube assembly, awning arms, hardware, light track, and LED lights are not included.
  • Do not attempt to install on a single-person basis -- fabric installation requires two people to avoid damage to the fabric or roller assembly.
  • Retract the awning in high winds and before any travel to protect the fabric and awning hardware.
  • Allow fabric to dry completely before rolling up to prevent mildew buildup under vinyl.


Browse for more RV Accessories in the same category as this item:

Awning Sun & Shade > Awning Accessories
Awning Sun & Shade