Stop buying and swapping 1 lb disposable propane cylinders every time you fire up a portable grill, camp stove, or lantern. This 48-inch thermoplastic LP hose lets you tap directly into your RV's onboard propane system through a standard female quick-disconnect port -- giving your small propane appliances a virtually unlimited fuel supply from your main tank.
The MB Sturgis 100476-48-MBS bridges the gap between your RV's low-pressure LP distribution system and the small appliances that normally run on 1 lb throw-away cylinders. One end terminates in a 1/4" Model 250 Male Quick Disconnect Plug that mates with any standard female quick-disconnect port on your RV's exterior propane connection. The other end features a CGA #600 connection (Male 1"-20 thread) -- the same fitting found on the collar of standard 1 lb propane cylinders -- so it threads directly into your portable appliance without any adapter.
At 48 inches (4 feet) of reach, the hose gives you comfortable working distance between your rig's LP outlet and a side-table grill, camp stove, or lantern without straining fittings or kinking the line. The 1/4" ID thermoplastic hose construction is flexible across a wide temperature range, holds up to outdoor UV and weather exposure, and is rated well above normal LP service pressures.
Feeds LP appliances directly from your RV's main tank via a female quick-disconnect port -- no more swapping disposable cylinders mid-cook.
Male 1"-20 thread (CGA #600) threads into the appliance inlet just like a standard 1 lb cylinder collar -- no adapters needed.
Burst-rated at 350 PSI -- far above typical regulated LP service pressures -- for a reliable safety margin in RV and camp use.
Rated from -40F to 140F (-40C to 60C), staying flexible and leak-free from cold winter storage temps to hot desert afternoons.
Most modern RVs and travel trailers include one or more female quick-disconnect outlets plumbed into the exterior LP distribution line -- often located near the outdoor kitchen, grill port, or a pass-through compartment. These ports are designed to accept a 1/4" Model 250 Male Quick Disconnect Plug, which is exactly what this hose provides on the tank end.
When connected, your appliance draws regulated LP gas at the pressure set by your RV's main two-stage regulator (typically 11" water column / approximately 0.43 PSI at the appliance). This means the hose itself carries low-pressure regulated gas to the appliance -- well within its 350 PSI rating -- while the quick-disconnect plug provides a self-sealing shutoff when the hose is disconnected.
The quick-disconnect plug end of this hose requires a female quick-disconnect port already installed on your RV's LP system. If your rig does not have a female quick-disconnect outlet, you will need a compatible tee fitting or port adapter installed by a qualified LP technician first -- this hose does not include that fitting.