Home > LP Gas > LP Hoses >

Marshall Excelsior MER613-36 Propane Hose 3/8" Female Flare Swivel x 3/8" Female Flare Swivel 36" - 350 PSI Rated

Marshall Excelsior MER613-36 36-inch RV propane hose with 3/8 inch female flare swivel fittings, thermoplastic construction, 350 PSI rated
Marshall Excelsior 3/8" Female Flare Swivel x 3/8" Female Flare Swivel Propane Hose - 36"
 
List Price: $23.39
: $16.99
You save $6.40!
Part Number: MER613-36
Manufacturer: Marshall Excelsior

Quantity in Stock :39

Availability: In Stock
Qty:

 
Marshall Excelsior350 PSI RatedMade in the USAMarshall Excelsior MER613-36 -- 36" Propane Hose, 3/8" Female Flare Swivel x 3/8" Female Flare Swivel

A heavy-duty, flexible LP gas hose built specifically for RV liquid propane applications. The MER613-36 delivers reliable, leak-resistant connections between your RV regulator, appliances, or auxiliary tanks -- rated to 350 PSI working pressure and backed by a limited 5-year manufacturer warranty.

Reliable LP Gas Connections for RV and Outdoor Use

The Marshall Excelsior MER613-36 is a 36-inch propane supply hose designed for use in RV liquid propane gas systems. With 3/8" female flare swivel fittings on both ends, this hose makes it straightforward to connect regulators, valves, or appliances without the need for additional adapters in standard 3/8" flare applications.

Marshall Excelsior has manufactured LP gas components in the USA for decades. This hose reflects that heritage -- UL-listed and CGA-approved, with fully crimped brass ferrules at both ends for a secure, durable connection that resists pull-out and vibration loosening common on the road.

350 PSI Working Pressure

Rated for up to 350 PSI working pressure, well above the typical low-pressure demands of RV propane systems, providing a strong safety margin.

Fully Crimped Brass Ferrules

Both ends feature precision-crimped brass ferrules that lock the fitting to the hose body, resisting pull-out forces up to 400 lbs.

UL Listed and CGA Approved

Meets UL and CGA certification standards for LP gas hose assemblies, ensuring compliance with RV and propane industry safety requirements.

Thermal Protection Included

Built-in thermal protection on the hose body helps guard against heat exposure in engine bays, utility compartments, and outdoor installations.

Flexible Thermoplastic Construction

The hose body is constructed from a flexible thermoplastic compound approved for LP gas service. Unlike rubber hoses that can crack and harden over time, this thermoplastic construction maintains flexibility across a wide temperature range -- an important characteristic for RVs that travel between climates or sit in storage during winter months.

The 3/8" inside diameter provides adequate flow for typical RV LP gas appliances including furnaces, water heaters, ranges, and refrigerators running on propane.

Both Ends Swivel -- The female flare swivel design on both fittings allows each end to rotate independently during installation. This prevents hose twist and makes it much easier to achieve a proper thread engagement without kinking the hose or cross-threading the fitting.

Common RV Applications

This hose is well-suited for a range of RV and outdoor propane connections, including:

  • Connecting a two-stage regulator to the LP supply line
  • Extending propane supply to an outdoor appliance connection
  • Linking an auxiliary or secondary propane tank
  • Replacing an aging or cracked factory-installed LP supply hose
  • Outdoor grilling, fire pit, or generator connections where a 36" reach is needed
Thread Compatibility Note: Both fittings are 3/8" female flare (SAE 45-degree flare, standard for LP gas). This is the most common thread standard on RV propane regulators and appliance connections. Verify your existing fittings are 3/8" male flare before ordering -- no adapter is included.

Installation Tips

For Best Results:
  • Always use an approved LP gas thread sealant or Teflon tape rated for gas service on male fittings -- never standard plumber's tape.
  • Hand-tighten first, then snug with a wrench. Do not over-torque flare fittings.
  • After installation, perform a leak test with soapy water or an approved leak-detection solution before operating any appliance.
  • Route the hose away from sharp edges, exhaust components, and areas subject to abrasion.
  • Inspect the hose annually for cracks, abrasion wear, or fitting corrosion. Replace if any damage is found.

Product Specifications

ManufacturerMarshall Excelsior
Part NumberMER613-36 (SKU 06-0205)
UPC815505011907
Country of OriginMade in the USA
WarrantyLimited 5-Year Manufacturer Warranty

Physical Dimensions

Hose Length36 inches
Inside Diameter3/8 inch
Weight0.6 lbs

Fitting Details

Inlet Fitting3/8" Female Flare Swivel
Outlet Fitting3/8" Female Flare Swivel
Flare StandardSAE 45-degree (standard LP gas)
Ferrule TypeFully crimped brass

Pressure and Safety Ratings

Working Pressure Rating350 PSI
Pull Test Rating400 lbs
CertificationsUL Listed, CGA Approved
Thermal ProtectionYes, included

Hose Material

Hose BodyFlexible thermoplastic, LP gas rated
Gas TypeLiquid Propane (LP) / LPG
Important Information
  • This hose is rated for LP (liquid propane) gas service only. Do not use with natural gas, compressed air, hydraulic fluid, or other media.
  • Maximum working pressure is 350 PSI. Do not use in high-pressure applications exceeding this rating.
  • Both fittings are 3/8" female flare -- you will need 3/8" male flare connections on your regulator or appliance. No adapters are included.
  • Always perform a leak test after installation before lighting any appliance or opening the main tank valve.
  • Inspect the hose at least once per season. Replace immediately if cracks, cuts, kinking, or corrosion are observed.
  • Keep away from open flame, hot engine components, and sharp edges during installation and operation.
  • This product is not intended for use with compressed natural gas (CNG) systems.


Browse for more RV Accessories in the same category as this item:

LP Gas > LP Hoses
LP Gas