A full 12 feet of flexible, UL- and CGA-approved propane hose built for RV LP gas systems. The Soft Nose POL inlet threads directly onto standard propane cylinders without a wrench, while the 1"-20 Male Swivel outlet connects to standard RV regulator and appliance fittings. Rated to 350 PSIG working pressure and backed by a limited 5-year manufacturer warranty from a company that has been making LP gas equipment in the USA since 1932.
The 144-inch length gives you real flexibility when connecting a portable propane cylinder to an RV regulator, outdoor appliance, generator, or propane distribution system. Whether you are extending the reach from a remote cylinder bank or simply need a longer hose to route around an obstacle, the MECMER407-144 covers it without requiring additional fittings or adapters in the line.
The hose body is a flexible thermoplastic construction -- not rubber -- which resists cracking and UV degradation better than older rubber hoses in outdoor and under-rig environments. Crimped brass ferrules on both ends create a leak-resistant, permanent connection between the hose and the brass fittings. Thermal protection is built in along the hose body.
Left-hand thread POL fitting with integrated O-ring and plastic handwheel. No wrench needed for connection to standard propane cylinders.
Standard 1"-20 UNF male swivel fitting connects to RV regulators, quick-connects, and most LP appliance inlets without adapters.
Hose and fittings meet UL and CGA standards for LP gas service, making it acceptable for use in code-compliant RV and outdoor installations.
Both ends are fully crimped -- not clamped -- for a permanent, high-integrity seal rated to withstand a 400 lb. pull test.
This hose is the right choice when:
The Soft Nose POL end uses a left-hand internal thread (POL = Prest-O-Lite) that mates with the valve outlet on standard 20 lb., 30 lb., and 40 lb. propane cylinders commonly used in RV applications. The integrated O-ring provides the seal -- no Teflon tape required. The plastic handwheel allows hand-tight connection.
The 1"-20 Male Swivel outlet is the standard thread used on most RV two-stage regulators, Camco-style regulators, and many LP quick-connect systems. The swivel feature prevents the hose from twisting during connection, which reduces stress on the hose body and fitting over time.