Keep your RV's electric entry steps working reliably with this OEM-spec replacement pigtail adapter. The Lippert 379164 is the correct wiring harness to bridge your step control unit to Kwikee motor assembly 369529 (also sold under Kwikee part number 3392152), restoring automatic extend and retract operation without splicing or improvising connections.
When the pigtail harness between your step control module and the step motor is damaged, corroded, or missing, the entire automatic step system stops working. This Lippert 379164 adapter is the factory-correct replacement, engineered to mate with motor assembly 369529 on one end and the step control unit on the other -- no cutting, no splicing, and no guessing at wire gauge or connector type.
At 12 inches in length and built with 16 AWG wire, this harness is sized to reach comfortably in the typical Kwikee step bay while handling the current draw of the step motor without voltage drop issues. Both ends feature locking connectors that click firmly into place, eliminating intermittent connection problems that can cause steps to behave erratically or fail to retract.
Male and female ends lock securely to prevent vibration-induced disconnection on the road.
Properly rated wire gauge for the current demands of the Kwikee step motor assembly.
Designed specifically for motor assembly 369529 (Kwikee 3392152) -- no adapter or modification needed.
Manufactured domestically with a limited 1-year warranty from Lippert Components.
This harness is the electrical link that tells the step motor when to extend and retract. Installing a fresh, undamaged harness is often the fastest fix for steps that won't move or move intermittently.
This pigtail is designed for use with Lippert motor assembly part number 369529, which is also cross-referenced as Kwikee part number 3392152. Verify your motor assembly part number before ordering to confirm fitment.
This listing covers the pigtail adapter harness only. The step motor assembly (369529 / 3392152) and the step control unit are sold separately. If your motor or control board has also failed, those components will need to be sourced independently.