Keep your travel trailer or fifth-wheel propane setup protected from road debris, UV degradation, and weather with the Camco 50503 slide-on tank cover. Designed specifically for two standard 20 lb (5-gallon) propane cylinders mounted side by side, it slides on in seconds and still leaves your shutoff valves fully reachable -- no tools, no straps, no hassle.
Propane tanks mounted on the A-frame or tongue of a trailer take a beating: road grit, UV rays, moisture, and bird debris all accelerate corrosion on valve bodies and tank collars. The Camco 50503 wraps both 20 lb cylinders in a single molded polyethylene shell that is tough, lightweight, and purpose-built for this exact tank configuration.
The updated design incorporates a top opening that gives you clear, unobstructed access to both valve handles without removing the cover. Unhook your regulator or check your tank level without fighting the cover every time.
Open top leaves both shutoff valves fully reachable -- swap tanks or check pressure without pulling the cover off.
Molded from UV-stabilized polyethylene so the shell resists sun fade, cracking, and brittleness season after season.
Hard shell deflects road rocks, gravel spray, and trail debris that dent or corrode bare tank exteriors and valve assemblies.
Fits over two tanks as a single unit. Includes installation hardware. No drilling, cutting, or complicated mounting required.
The 50503 is sized for two standard 20 lb (5-gallon) DOT propane cylinders -- the most common tank size shipped with travel trailers, fifth wheels, and pop-up campers from virtually every major manufacturer. These are the same tanks you refill at U-Haul, exchange at Blue Rhino/AmeriGas, or carry to your local propane dealer.
This cover does not fit 30 lb or 40 lb cylinders, nor is it designed for single-tank configurations. If your rig uses a single 20 lb tank, Camco offers a separate single-tank version.
Installation is straightforward:
No permanent modifications to your trailer frame or A-frame tongue are required. The cover is designed to sit stable on flat tongue platforms standard to most trailers.