Give your RV a fresh look and reliable weather protection with this Lippert Solera replacement awning fabric. Built from heavy-duty 13.5-oz vinyl with heat-welded, leak-resistant seams, this fabric is engineered to withstand sun, rain, and cold down to -25F. The Sand Fade color adds a warm, neutral tone to your campsite setup. Designed for 20ft awning assemblies and compatible with Solera, Dometic, and Carefree awning systems.
Replacement awning fabric takes constant abuse -- UV exposure, wind, rain, and repeated rolling cycles. Lippert's Solera fabric is made to hold up under all of it. The 13.5-oz vinyl construction is thick enough to resist tearing and sagging over time, while the heat-welded seams eliminate the stitched needle holes that become leak points on lesser fabrics.
At 19ft 1in wide with an 8ft projection, this fabric covers a generous outdoor living area and fits the standard 20ft awning assembly configuration used across a wide range of Class A, Class C, and fifth-wheel rigs. The underside is finished in white for a clean, bright look from inside your awning's shade.
Vinyl is tested to -25F without cracking or stiffening, so the fabric stays flexible during cold-weather storage and early-season setup.
Seams are fused under heat rather than stitched, eliminating needle holes that lead to leaks. Critical stress points are reinforced for long-term durability.
A poly cord is sewn in for an optional light track, letting you add LED awning lights without drilling or adhesive. Light track and LED lights are sold separately.
Engineered to fit Solera, Dometic, and Carefree 20ft awning assemblies, covering a broad range of popular RV awning systems with one replacement fabric.
This fabric is listed as 19ft 1in wide, which is correct for a 20ft awning assembly. This is not an error -- replacement awning fabric is intentionally manufactured approximately 11 inches shorter than the nominal awning assembly width. This accounts for the fabric attachment hardware at each end of the roller tube. When in doubt, measure your existing fabric width, not your roller tube.
This Lippert Solera fabric is designed to work with the most common manual and power awning platforms found on production RVs:
The roller assembly, awning arms, and hardware are not included with this fabric. This listing is for the fabric panel only. If you are replacing fabric on a functioning roller and arm assembly, this is a direct drop-in replacement.