Restore your RV's outdoor living space with a direct-fit replacement awning fabric engineered to Lippert's Solera specs. The V000345103 delivers durable 13.5-oz vinyl construction, cold-crack-tested performance down to -25F, and heat-welded seams that hold up across seasons -- all in a Green Fade color with a clean white underside.
When your existing awning fabric fades, tears, or starts leaking at the seams, you don't need to replace the entire awning assembly -- just the fabric. The Lippert V000345103 is purpose-built to drop into your existing Solera roller tube and hardware, restoring full functionality without the cost or hassle of a complete awning replacement.
At 13.5 oz per square yard, this is a commercial-weight vinyl that handles UV exposure, wind-driven rain, and debris better than lighter residential-grade fabrics. The topside Green Fade color transitions naturally to resist the blotchy sun-bleaching that plagues single-tone awnings, while the white underside reflects heat and brightens the patio area underneath.
Heavy commercial-weight vinyl resists tearing, abrasion, and UV degradation far better than lighter 8-10 oz alternatives common on budget replacements.
Fabric stays pliable and crack-free in sub-zero storage and shoulder-season use -- critical for RVers who travel in early spring or late fall.
Seams are thermally fused rather than stitched, eliminating the needle holes that become leak points over time. Reinforces the fabric at its highest-stress areas.
An integrated poly cord runs the length of the roller hem, allowing an optional LED rope light track to be installed without additional drilling or hardware (light track and lights sold separately).
This fabric is manufactured to be compatible with the three most common RV patio awning brands: Lippert Solera, Dometic, and Carefree. If your roller tube and arms are in good shape, this fabric slides right in using your existing hardware -- no modifications needed in most installations.
The fabric width of 18'1" is designed to fit a 19 ft awning assembly. This is intentional -- replacement awning fabric is cut approximately 11 inches narrower than the nominal awning width to account for the roller tube overlap and end caps on both sides. If you have a 19 ft awning, order 18'1" fabric. Do not order fabric that matches your awning's total rail-to-rail measurement.
This fabric provides an 8-foot projection -- the distance the awning extends outward from your RV sidewall when fully open. An 8 ft projection is the most common depth for standard slide-out and patio awnings on Class A, Class C, and fifth-wheel rigs, providing enough coverage for a folding chair setup or small table area without requiring deep-slide roller arms.
Awning fabric is made to order and cannot be returned once cut. Before placing your order, measure the length of your existing roller tube from end cap to end cap (not the fabric). Your roller tube measurement should be approximately 19 ft to confirm the V000345103 is the correct size. If your roller tube measures a different length, select the fabric size that is approximately 11 inches shorter than your roller tube measurement.