Sleek, form-fitting marine-grade step tread covers for wide MORryde Gen II StepAbove® steps. Water-wicking, slip-resistant, and pet-friendly. Peel-and-stick installation. Pack of 3 — includes one deep top step cover and two standard lower step covers.
RV entry steps take constant abuse — foot traffic, rain, mud, pet claws, and years of outdoor exposure wear down bare step surfaces quickly, reducing traction and creating slip hazards. The MORryde STP54-066 Step Tread Covers are purpose-designed replacements for the wide MORryde Gen II StepAbove® 3-step configuration, crafted from marine-grade flooring material that delivers slip resistance, water-wicking performance, and a clean, sleek appearance in one easy peel-and-stick application.
The pack includes three covers precisely sized for the Gen II StepAbove® wide step geometry: one deeper cover for the top step and two standard covers for the lower steps. The marine-grade material is built for outdoor durability, resisting UV exposure, moisture, and pet wear while maintaining traction in wet or dry conditions. Installation requires no tools — simply peel the backing and apply.
Marine-grade material stands up to pet claws and pet traffic without tearing, peeling, or losing its grip surface
Wicks moisture away from the step surface and maintains slip-resistant traction in wet, muddy, or damp conditions
Built from the same flooring material used in harsh marine environments — UV-resistant, weather-durable, and long-lasting outdoors
No tools, no adhesives, no drilling — simply peel the backing and press onto the step surface for a clean, secure fit
MORryde explicitly requires that you measure your steps before ordering. The STP54-066 multi-pack is specifically designed for MORryde Gen II StepAbove® wide steps and accounts for the deeper top step unique to that system. It is not a universal fit for all RV entry steps. This pack is the correct choice if you have: • MORryde Gen II StepAbove® wide steps (23.5" wide) • A 3-step configuration with a deeper top step This pack is NOT the correct choice if you have: • Narrow steps (under 23.5" wide) — see the narrow step tread options • Steps from a different manufacturer or step system • Steps that do not have the Gen II deeper top step • A different step count (2-step or 4-step configurations have separate part numbers) When in doubt, measure your step width and depth and compare to the dimensions below before purchasing.
MORryde offers step tread covers in multiple configurations for narrow and wide Gen II StepAbove® steps. Match your step count and width: Wide Step Packs (23.5" wide — Gen II StepAbove®): • STP54-066 (This Product) — 3-Step Wide Pack • STP54-067 — 4-Step Wide Pack Narrow Step Packs (19.5" wide): • STP54-068 — 2-Step Narrow Pack • STP54-069 — 3-Step Narrow Pack Individual Replacement Covers (Wide): • STP54-071 — Single Deep Step Cover (23.5" x 9.5") — for top step replacement only • Individual standard step covers also available — see etrailer.com Individual covers are not available at ShopMORryde.com and must be purchased through authorized dealers.
Installation Steps: 1. Measure Your Steps: Confirm your step width is 23.5" and you have a Gen II StepAbove® 3-step configuration with a deeper top step before proceeding 2. Clean Step Surfaces: Wipe all step surfaces clean and dry — remove dirt, grease, and moisture for best adhesion 3. Position Top Step Cover: Align the 23.5" x 9.5" cover on the top (deeper) step, ensuring even overhang on all sides 4. Peel and Press: Remove the backing and press the cover firmly onto the step surface, smoothing from center outward to prevent air bubbles 5. Repeat for Lower Steps: Apply the two 23.5" x 7" covers to the lower steps in the same manner 6. Allow to Set: Allow adhesive to cure per the installation instructions before heavy foot traffic Refer to MORryde's Step Tread Covers Installation Instructions for complete guidance.
In The Box (Pack of 3): • (1) Top Step Tread Cover — 23.5" x 9.5" (Deep) • (2) Lower Step Tread Covers — 23.5" x 7" each • Peel-and-Stick Backing Pre-Applied NOT Included / NOT Required: • No additional adhesive needed • No tools required for installation
MORryde Technical Support: Phone: (574) 293-1581 Email: [email protected] Made in Elkhart, Indiana, USA MORryde is an ISO 9001 certified manufacturer of RV entry, safety, and specialty vehicle products.
Measure your step width and count before ordering. Multi-packs are designed specifically for MORryde Gen II StepAbove® steps with the deeper top step.
Always measure your steps before ordering. Contact MORryde at (574) 293-1581 if you are unsure which pack is correct for your step system.