Keep your slide-out locked in position with this genuine Lippert detent pin. Part number 136162 is a direct factory replacement for worn, bent, or missing retention pins on a wide range of Lippert slide-out mechanisms. A small part with a big job -- these pins secure slide-out components at key travel and deployment points, and a failed pin can mean unwanted movement or a slide that won't stay fully extended.
Lippert's slide-out systems use detent pins at multiple points in the mechanism -- in rack assemblies, mounting brackets, motor housings, and travel locks. When one of these pins shears, corrodes, or goes missing, the entire slide-out mechanism can lose its positive retention. This 5/16 in. x 3-1/4 in. pin is the correct factory specification for the affected positions that call for this diameter and length.
Stocking a spare is smart preventive maintenance. These pins are consumable hardware that sees stress every time your slide-out cycles. Having the right replacement on hand means a roadside repair takes minutes, not days waiting for a service appointment.
Factory part number 136162 -- the exact spec Lippert builds into its slide-out systems. No fitment guesswork.
Diameter and length match the designed retention point. Using the wrong size pin risks mechanism damage or failed retention.
Used across multiple Lippert slide-out product families including rack-and-pinion and cable-driven systems.
Pin replacement requires basic hand tools. No special equipment or alignment procedures needed in most applications.
Detent pins in Lippert slide-out systems serve as positive-stop and retention fasteners. Common locations where the 5/16 in. x 3-1/4 in. pin is specified include slide-out travel lock assemblies, rack mounting brackets, and motor or gearbox mounting positions. If you are matching a failed pin, measure the shank diameter and usable length of the original before ordering to confirm this is the correct replacement.