Home > Carriers & Haulers > Bike Carriers >

Swagman 64675 Original 4-Position Towing Bike Carrier -- 2" Hitch, 3500 lb Tow Rating

Swagman 64675 Original 4-Position Towing Bike Carrier for 2-inch Class III and IV trailer hitch receivers with integrated tow bar
Swagman Original 4 Position Towing Bike Carrier
 
Alternative Views:


List Price: $237.60
: $213.99
You save $23.61!
Part Number: 64675
Manufacturer: Swagman

Quantity in Stock :2

Free Shipping
Availability: In Stock
Qty:

 
Swagman 4-Bike Capacity 3500 lb Tow Rating Swagman Original 4-Position Towing Bike Carrier (64675)

The only bike carrier that lets you haul four bicycles and still pull your boat, trailer, or watercraft behind you -- all from a single 2" hitch receiver. Built for RVers, campers, and boaters who refuse to leave the bikes at home just because they're already towing something.

Carry Four Bikes and Still Tow Your Trailer

Most bike racks force you to choose between hauling bikes and towing a trailer. The Swagman Original 64675 eliminates that tradeoff. Its built-in tow bar -- rated to 3,500 lbs gross tow weight with a 350 lb tongue weight capacity -- passes your tow connection straight through, so you can run a boat trailer, utility trailer, or personal watercraft dolly behind the rack without a second thought.

Four individual cradle arms each accommodate a separate bicycle frame. Rubber cushioning on every contact point protects paint and finishes while keeping bikes from shifting on the road. A turning knob on each arm clamps the frame securely in place, no tools required at the trailhead or campsite.

Tow-Through Design

Integrated tow bar with 3/4" diameter shank ball mount lets you pull a trailer or watercraft while bikes ride on the rack.

Four-Bike Capacity

Holds up to 4 bikes at 35 lbs per bike. Cradles are spaced 6" apart to prevent frame contact and scratching.

Tilt-Away Access

Rack tilts away from the vehicle for full rear access to your RV, SUV, or truck bed without unloading all four bikes.

Rubber Frame Protection

Rubberized cradle cushioning on the top plate and arms protects bicycle frames and grips them securely at highway speed.

Who This Rack Is Built For

This carrier is designed specifically for RV owners and campers who tow a secondary trailer -- boat, jet ski, utility, or pop-up -- and need to bring multiple bikes along. It installs into any 2" Class III or Class IV trailer hitch receiver and passes the towing connection through the rack's integrated ball mount, keeping your full tow capability intact.

Full-timers and weekend warriors with fifth wheels or travel trailers typically tow this carrier on a truck or SUV's rear hitch, then connect the camper's umbilical to the rack's tow bar. Boaters use the same setup to run a bike rack and a PWC dolly from a single hitch point.

Tilt-Away for Rear Access

The entire rack pivots away from the vehicle without requiring you to remove the bikes. This is especially useful at campsites where you need to access rear storage, a trailer hitch-mounted cargo carrier, or a truck bed -- without a full unload every time.

Frame Compatibility and Adapter Bar Note

The top-plate cradle system accepts a wide range of standard diamond-frame adult bicycles. However, not all bikes have a horizontal top tube that sits flat across the cradle arms.

  • Standard men's road, mountain, and hybrid bikes with a horizontal top tube fit without modification.
  • Women's step-through frames, children's bikes, and alternative-geometry frames typically require a bike frame adapter bar (sold separately) to bridge the gap and keep the bike level.
  • Fat-tire bikes may require additional clearance checks given the 6" cradle spacing.
Adapter Bar Not Included

A bike frame adapter bar is NOT included with this carrier. If you are transporting women's, children's, or step-through frame bicycles, purchase a universal frame adapter bar separately before your trip. Attempting to carry incompatible frames without an adapter bar can result in bike damage or an unsecured load.

Tow Ball Shank Requirement

The rack's integrated tow bar accepts a standard ball mount. The ball for towing applications requires a 3/4" diameter shank. Verify your ball mount shank diameter before use. Standard 1-7/8" and 2" trailer balls with a 3/4" shank are widely available at any trailer supply or RV parts store.

What Is Included
  • 1 x Swagman Original 4-position bike carrier rack (part 64675)
  • 1 x Integrated tow bar assembly
  • Hitch pin and clip hardware for receiver attachment

Bike frame adapter bar, trailer ball, and ball mount are NOT included.

Installation and Use Tips
  • Always insert and secure the hitch pin before loading bikes or attaching a trailer.
  • Check all turning knobs for proper tightness before driving -- vibration can back them off over time.
  • Use locking hitch pins (sold separately) if security is a concern at campgrounds or rest stops.
  • Do not exceed 35 lbs per bike cradle arm or the 3,500 lb gross tow rating on the tow bar.
  • Store the rack indoors or covered when not in use to extend the life of the rubber cushioning.

Warranty

Swagman backs the Original 64675 with a Limited Lifetime Manufacturer Warranty against defects in materials and workmanship under normal use conditions.

Capacity and Load Specs

Bike Capacity4 bikes
Max Load Per Bike35 lbs
Tow Bar Rating (GTW)3,500 lbs
Tongue Weight Capacity350 lbs
Rack Weight38 lbs

Fitment and Receiver Info

Hitch Receiver Size2" (Class III and Class IV)
Tow Ball Shank Required3/4" diameter
Tilt-Away FeatureYes -- tilts away for rear access

Dimensions

Cradle Spacing6" center to center
Receiver Tube to Bike Support32" (bottom of bike support)

Part and Product Identification

ManufacturerSwagman
Manufacturer Part Number64675 (SWG64675)
SKU92-1239
UPC776214646753

Frame and Bike Compatibility

Standard Diamond FramesFits without adapter bar
Women's Step-Through FramesRequires adapter bar (sold separately)
Children's BikesRequires adapter bar (sold separately)
Alternative Geometry FramesRequires adapter bar (sold separately)
Top PlateAccepts various frame sizes with rubber cushioning

Included in the Box

Bike Rack (4-position)Included (x1)
Tow Bar AssemblyIncluded (x1)
Bike Frame Adapter BarNOT included -- sold separately
Trailer BallNOT included -- sold separately
Ball MountNOT included -- sold separately
Locking Hitch PinNOT included -- sold separately

Warranty

CoverageLimited Lifetime Manufacturer Warranty
Issued BySwagman
Important Information -- Read Before Use
  • Maximum load is 35 lbs per bike arm. Overloading individual arms can damage the rack and create an unsafe condition at highway speed.
  • The tow bar is rated to 3,500 lbs gross towing weight and 350 lbs tongue weight. Do NOT exceed these limits regardless of your tow vehicle's rating.
  • The tow ball requires a 3/4" diameter shank -- confirm compatibility before attaching any trailer.
  • Fits ONLY 2" Class III and Class IV hitch receivers. This rack is NOT compatible with 1-1/4" receivers.
  • A bike frame adapter bar is required for women's, children's, and step-through frame bicycles. It is not included and must be purchased separately.
  • Always verify the hitch pin is fully inserted and clipped before loading bikes or connecting a trailer.
  • Check all bike securing knobs before every trip. Re-tighten as needed -- road vibration can loosen them.
  • The integrated tow bar is designed for lightweight trailer towing (boat, PWC, utility). Confirm your intended trailer's weight is within the 3,500 lb GTW limit before use.

ACCESSORIES
Curt Bike Rack Support Strap Curt 23666 Multi-Use Cable Lock -- 6 ft Braided Steel, 3/8 in Diameter, Vinyl Coated
: $12.57

Add
: $35.78

Add
Curt 18050 Bike Rack Support Strap Curt 23666 multi-use cable lock with 6 ft black and orange vinyl-coated braided steel cable, 3/8 inch diameter, with 2 keys included


Browse for more RV Accessories in the same category as this item:

Carriers & Haulers > Bike Carriers
Carriers & Haulers


$20.99
$4.85
$91.49
$24.61