Lippert 308287 Quick Release Pull Pins for 5th Wheel Landing Gear
Ditch the loose hair pins. These spring-loaded pull pins bolt directly onto compatible Lippert 5th wheel landing gear legs, drop into position automatically, and stay attached so you never lose them at a campsite again.
The Lippert 308287 quick release pull pins are purpose-built replacement hardware for compatible Lippert 5th wheel landing gear assemblies. If your current setup uses traditional loose hair pins, lynch pins, or clip-style retainers to hold the inner landing gear leg at different height positions, these are a direct upgrade.
The spring-loaded mechanism lets you pull the pin, drop the inner leg to your needed height, and release -- the pin snaps back automatically into the detent hole. No fishing around under the trailer for a dropped cotter pin, no bent hairpins, no wasted time during hookup or setup. The bolt-on collar keeps the pin permanently attached to the leg, so the hardware travels with the rig.
Pull to release, let go to lock. The spring mechanism snaps the pin into the height-adjustment hole automatically -- no manual reinsertion needed.
Bolt-on collar keeps the pin permanently mounted to the landing gear inner leg. No more lost pins on setup day.
Covers both landing gear legs -- driver side and passenger side -- in a single purchase. No need to order separately per leg.
Direct replacement for standard loose hair pins, cotter pins, and lynch pins used on compatible Lippert 5th wheel landing gear systems.
5th wheel landing gear legs typically telescope -- the inner leg slides down through the outer tube and locks at a set height using a pin through aligned holes. Standard loose pins work, but they are easy to drop in gravel, mud, or grass, and they can be difficult to retrieve at night or in bad weather. Over time, cotter pins bend and become harder to insert.
The Lippert 308287 spring-loaded design eliminates that friction point. Because the pin stays attached and self-locks, the entire jack height-adjustment process becomes a one-hand operation. For full-timers or frequent travelers who set up and break down camp regularly, the time savings and reduced frustration add up quickly.
Note: installation tools (wrench, drill) are not included. Existing landing gear assembly and trailer are not included.
These pins are designed for compatible Lippert 5th wheel landing gear assemblies that use a telescoping inner/outer leg design with through-hole height adjustment. Verify your existing landing gear uses a pin-style height adjustment (not a rack-and-pinion or continuous screw mechanism) before ordering. If your current legs already use a spring-loaded pin style, these are likely a direct replacement. For rigs with Lippert HappiJac, Power Gear, or Atwood-branded landing gear, confirm hole diameter and pin body diameter compatibility before installation.