Home > Awning Sun & Shade > Awning Accessories >

Lippert V000334346 Solera Replacement RV Awning Vinyl Fabric 9'1" Sand Fade -- 10 ft. Awning, 13.5 oz

Lippert V000334346 Solera Replacement RV Awning Vinyl Fabric, 9 foot 1 inch wide, Sand Fade color, 13.5 oz heat-welded vinyl, fits 10 ft. awnings
Lippert Solera Replacement RV Awning Vinyl Fabric, 9'1", Sand Fade
 
Alternative Views:


: $248.79
Part Number: V000334346
Manufacturer: Lippert
NOTE: Ships in 5 to 7 days

Quantity in Stock :

Free Shipping
Availability: Out of Stock
Qty:

 
Lippert Solera 13.5 oz Vinyl 5-Year Warranty Lippert V000334346 -- Solera Replacement RV Awning Fabric, 9'1", Sand Fade

When your awning fabric is faded, torn, or cracking, the Lippert Solera replacement fabric lets you restore full function without replacing the entire awning assembly. This 9'1" wide, 13.5 oz vinyl fabric fits a 10 ft. awning and is cross-compatible with Solera, Dometic, and Carefree awning systems. Cold-crack tested to -25F and backed by a 5-year limited warranty, it is built to outlast the conditions that wear factory fabric out.

Purpose-Built Replacement Fabric for 10 Ft. RV Awnings

The V000334346 is a direct replacement awning fabric sized specifically for 10 ft. awning assemblies. At 9'1" wide -- approximately 11 inches shorter than the full awning width -- the fabric dimensions account for the roller tube hardware on each end, which is standard across Solera, Dometic, and Carefree awning systems.

The fabric projects 8 feet outward when fully extended, providing meaningful shade and rain coverage for a typical RV patio setup. The underside is white for a clean interior appearance and better light reflection. The Sand Fade colorway offers a neutral, fade-pattern design that blends well with most RV exterior finishes.

Heat-Welded Seams

Seams are heat-welded rather than stitched, eliminating stitch holes where water can wick through. Critical stress points are reinforced for long-term durability.

Cold-Crack Tested to -25F

Vinyl compound is formulated and tested to remain flexible at -25F, so the fabric won't crack or delaminate during cold-weather storage or unexpected temperature drops.

Poly Cord Light Track

Includes a poly cord sewn into the hem for use with an optional light track system. LED lights and light track hardware are not included but can be added separately.

13.5 oz Vinyl Construction

Heavier than economy-grade fabrics, 13.5 oz vinyl provides improved tear resistance and UV protection while remaining manageable for a single-person installation.

Compatibility -- Which Awnings Does This Fit?

This fabric is sized and constructed to fit awning assemblies from the following brands:

  • Lippert Solera -- the primary brand this fabric is designed and manufactured for
  • Dometic -- compatible roller tube and end cap dimensions
  • Carefree of Colorado -- compatible with same-dimension assemblies

The key fitment measurement is the awning assembly width, which should be 10 feet. The fabric width of 9'1" is approximately 11 inches shorter than the assembly width, which is the correct allowance for roller hardware. If your assembly measures a different overall width, this fabric is not the correct size -- select the fabric sized for your specific awning width.

How to Measure Your Awning
Measure the full width of your awning assembly from end cap to end cap. If that measurement is 10 feet, this fabric is the correct size. Do not measure the existing fabric alone -- measure the full hardware assembly. Fabric width will always run approximately 11 inches shorter than assembly width.

What Is Included -- and What Is Not

  • 1x replacement awning fabric, 9'1" wide x 8' projection, Sand Fade / white underside
  • Poly cord sewn in for optional light track use

Not included: roller tube assembly, end caps, mounting hardware, light track, LED lights, or any installation tools. This is fabric-only replacement.

5-Year Limited Manufacturer Warranty
Lippert backs this replacement fabric with a 5-year limited warranty covering defects in materials and workmanship under normal use conditions.

Installation Overview

Replacing awning fabric on a Solera, Dometic, or Carefree awning is a manageable DIY project for most RV owners with basic tools. The general process involves:

  • Removing the roller tube from the awning arms
  • Sliding the old fabric out of the roller tube channel and the travel lock channel on the arm
  • Feeding the new fabric into both channels and securing
  • Reinstalling the roller tube and adjusting spring tension as needed

The exact process varies by awning model and year. Refer to your awning arm label or Lippert's online resources to confirm the correct spring tension setting for your assembly before reinstalling.

Maintenance Tips for Longer Fabric Life
  • Clean with mild soap and water -- avoid petroleum-based solvents or bleach concentrates
  • Allow fabric to dry fully before rolling up to prevent mildew
  • Retract the awning during high winds or storms, even brief ones
  • Inspect seams and roller channel contact points each season for wear

Fabric Dimensions

Fabric Width9 ft. 1 in. (9'1")
Projection (Depth)8 ft.
Fits Awning Assembly Width10 ft.
Width vs. AssemblyApprox. 11 in. shorter than full assembly width
Underside ColorWhite

Material Specifications

Fabric MaterialVinyl (PVC-coated polyester)
Fabric Weight13.5 oz per square yard
Seam ConstructionHeat-welded, leak-resistant
Cold-Crack Rating-25F
Top Color / PatternSand Fade

Product Identification

ManufacturerLippert Components
Part NumberV000334346
UPC848150036735
Product LineSolera Awning Replacement Fabric
Warranty5-Year Limited Manufacturer Warranty

Package Information

Shipping Weight10 lbs.
Roller Assembly IncludedNo -- fabric only
Light Track IncludedNo
LED Lights IncludedNo
Poly Cord IncludedYes (sewn in, for optional light track)

Compatible Awning Brands

Primary FitLippert Solera
Also CompatibleDometic, Carefree of Colorado
Assembly Width Required10 ft.
Important Information -- Read Before Ordering
  • Made to order -- this item cannot be returned or exchanged. Measure your awning assembly before placing your order.
  • Measure end cap to end cap on the awning assembly (not the old fabric). Assembly must be 10 ft. wide for this fabric to fit correctly.
  • Fabric width of 9'1" is intentionally shorter than the assembly -- this is correct and accounts for roller tube hardware.
  • Roller tube, end caps, arms, and all mounting hardware are not included. This listing is for replacement fabric only.
  • Light track and LED lighting components are not included. The poly cord enables an optional light track to be added separately.
  • Do not leave the awning extended in high winds. Fabric damage from wind is not covered under warranty.


Browse for more RV Accessories in the same category as this item:

Awning Sun & Shade > Awning Accessories
Awning Sun & Shade


$68.99
$10.99
$36.95
$25.99