Home > Jacks & Levelers > Levelers >

RV Designer E407 Stick-On Bubble Level 4.81" x 2.66" - Self-Adhesive RV Leveling Indicator

RV Designer E407 stick-on self-adhesive bubble level 4.81 by 2.66 inch for RV leveling and setup
 
: $5.80
Part Number: E407
Manufacturer: RV Designer

Quantity in Stock :35

Availability: In Stock
Qty:

 
RV Designer Self-Adhesive No-Drill Install RV Designer E407 Stick-On Bubble Level -- Fast, Accurate Leveling Without the Guesswork

Getting your rig level at every campsite matters -- for your refrigerator's absorption cooling, your slide-outs, your sleep, and your sanity. The RV Designer E407 is a compact stick-on bubble level that mounts to any clean, flat surface in seconds with no tools and no drilling. Stick it to your dash, your entry doorframe, a cabinet face, or your countertop and you will always know exactly where you stand -- literally.

A Simple Fix for a Constant Campsite Problem

Every RV owner knows the drill: pull in, guess at the slope, pull out boards, drive forward, check again, repeat. A reliable bubble level mounted in a visible spot inside or outside your rig turns that whole process into a quick glance and a confident pull-forward. The E407 gives you that reference point without adding any bulk or requiring any installation hardware.

RV Designer is a well-established brand in the RV accessories space, producing practical, purpose-built products for the interior and exterior of travel trailers, fifth wheels, Class A motorhomes, Class C motorhomes, and truck campers. The E407 fits squarely in their leveling and setup accessories line -- a no-fuss tool aimed at making campsite setup faster and more repeatable.

Stick-On Mount

Pre-applied adhesive backing bonds to clean, flat surfaces -- dash, cabinet, doorframe, or exterior compartment door. No screws, no drill, no mess.

Dual-Axis Bubble Vial

Reads both side-to-side and front-to-back tilt simultaneously so you can level your rig on both axes with a single glance.

Compact Footprint

At 4.81 x 2.66 x 0.75 in. and under 0.1 lbs., the E407 fits in tight spaces without blocking controls, windows, or walkways.

Universal Fit

Works on any RV type -- travel trailers, fifth wheels, Class A and Class C motorhomes, toy haulers, and truck campers -- anywhere you need a level reference.

Why Leveling Matters in an RV

An unlevel RV is more than just uncomfortable. Absorption-style refrigerators -- the most common type in travel trailers and fifth wheels -- require the unit to be within a few degrees of level to function correctly and to avoid damaging the cooling unit. Running an absorption fridge significantly off-level for extended periods can shorten its life or cause a complete failure of the cooling system.

Beyond the fridge, slide-outs extend and retract more smoothly on a level coach, water drains correctly from sinks and showers, and cabinet doors stay put instead of swinging open. A quick level check before you unhook is one of the fastest maintenance habits you can build -- and the E407 makes that check effortless.

Best Mounting Locations
  • Driver-side A-pillar or dash -- visible while pulling forward onto leveling blocks
  • Entry doorframe -- easy reference when you step outside to check
  • Inside a cabinet or pantry door near the refrigerator
  • Exterior compartment door for a quick outside check
  • Slide-out control panel surround for visibility during deployment

Installation Tips

Stick-on installation takes about 60 seconds, but a little prep goes a long way toward a permanent bond.

  • Clean the mounting surface thoroughly with isopropyl alcohol and let it dry completely before applying
  • Apply firm, even pressure across the entire back of the level for 30-60 seconds after placement
  • Allow the adhesive to cure for at least an hour before exposing the unit to vibration or moisture
  • Avoid mounting on textured, curved, or fabric surfaces -- the adhesive needs a smooth, rigid base
  • For exterior mounting, choose a protected location out of direct prolonged sun to maximize adhesive life
Calibration Note: Before you trust your level as a permanent reference, verify it against a known-level surface after installation. Place it on a surface you have confirmed is level with a carpenter's level, and note where the bubble centers. This gives you a reliable baseline for every future campsite setup.
Maintenance Tips
  • Wipe the bubble vial face with a soft damp cloth -- avoid solvents that can cloud the lens
  • If the unit ever lifts at an edge, re-press firmly or apply a small bead of silicone RV sealant around the perimeter to re-secure it
  • In extreme cold, adhesive can soften or stiffen -- re-check the bond at the start of each camping season

Pair It With Other Leveling Gear

The E407 tells you how far off you are -- leveling blocks and a wheel chock system get you there. For a complete leveling setup, pair this indicator with a set of stackable plastic leveling blocks under your drive tires and a set of wheel chocks to lock position once you are level. Many RV owners also add a tongue jack pad under their stabilizer jacks for soft ground. The E407 is the reference point that ties the whole system together.

Works Well With: RV leveling block sets, wheel chocks, stabilizer jack pads, and digital leveling apps for smartphones. The E407 provides a permanent in-rig reference that does not rely on a phone battery or signal.

Product Specifications

ManufacturerRV Designer
Part NumberE407
UPC601320984072
Product TypeStick-On Bubble Level

Physical Dimensions

Length4.81 in.
Width2.66 in.
Height / Thickness0.75 in.
Weight0.04 lbs.

Mounting Information

Mounting MethodPre-applied peel-and-stick adhesive backing
Hardware RequiredNone
Suitable SurfacesSmooth, flat, rigid surfaces -- plastic, metal, fiberglass, laminate, painted wood
Surface PrepClean with isopropyl alcohol before application

Level Type and Reading

Indicator TypeLiquid-filled bubble vial
Axes MeasuredSide-to-side and front-to-back (dual axis)
Power RequiredNone -- fully passive instrument

Compatibility

RV TypesTravel trailers, fifth wheels, Class A motorhomes, Class C motorhomes, truck campers, toy haulers
Marine / Other UseSuitable for boats, enclosed trailers, workbenches, and shop equipment
Indoor / OutdoorSuitable for both -- protected outdoor locations recommended
Important Information
  • Adhesive bond strength depends entirely on surface prep -- always clean with isopropyl alcohol before application. Mounting to a dirty, oily, or textured surface will result in the unit failing to stay in place over time.
  • This is a visual reference tool only. It is not a precision survey instrument. For critical leveling of sensitive equipment, verify with a quality carpenter's level or digital level in addition to this indicator.
  • Do not mount in a location that will be subject to direct impact or high-pressure washing, as the adhesive is not designed for mechanical stress or high-pressure water exposure.
  • Extreme temperature swings can affect adhesive performance over time. Inspect the bond at the start of each season and re-secure if any edge lifting is observed.
  • The bubble vial liquid is sealed and not user-serviceable. If the vial cracks or leaks, replace the unit.


Browse for more RV Accessories in the same category as this item:

Jacks & Levelers > Levelers
Jacks & Levelers


$77.49