Home > Awning Sun & Shade > Shades & Visors >

Trailersphere RVSHDY04 RV Shady Front Cap Window Cover -- Forest River Rockwood Ultra Lite / Signature Ultra Lite / Super Lite 2019-2026

Trailersphere RVSHDY04 RV Shady three-layer front cap window cover for Forest River Rockwood Ultra Lite Signature Super Lite 2019-2026 travel trailers
Trailersphere RV Shady Window Cover for Rockwood Ultra/Signature/Super Lite 2019-2026
 
Alternative Views:


: $239.95
Part Number: RVSHDY04
Manufacturer: Trailersphere

Quantity in Stock :12

Free Shipping
Availability: In Stock
Qty:

 
Trailersphere Custom-Fit -- Rockwood 2019-2026 Three-Layer Protection

RVSHDY04 RV Shady -- Custom Front Cap Window Cover for Forest River Rockwood

Precision-cut to fit the curved front cap glass on Forest River Rockwood Ultra Lite, Signature Ultra Lite, and Super Lite travel trailers (model years 2019 through 2026). Marine-grade vinyl outer shell and a 3/8" neoprene foam core absorb road debris impact and shield your glass from chips and cracks every mile of the trip.

Protect Your Front Cap Glass From the Road -- Before It Cracks

The panoramic front cap window on Rockwood Ultra Lite, Signature Ultra Lite, and Super Lite trailers is one of the most expensive single pieces of glass on the rig. Rock chips, highway debris, and vibration-induced stress fractures are the leading causes of front cap glass failure -- and most happen in transit, not at the campsite.

The Trailersphere RVSHDY04 RV Shady is a purpose-built exterior cover that mounts directly over the outside of the front cap glass before you hitch up and roll. It stays put at highway speed, cushions impact with a 3/8" neoprene foam core, and shields the glass surface with a tough marine-grade vinyl shell. When you arrive, it comes off in seconds.

Custom Die-Cut Fit

Patterned specifically to the Rockwood Ultra Lite, Signature Ultra Lite, and Super Lite front cap glass profile -- no trimming required.

3/8" Neoprene Foam Core

Absorbs road debris impact and buffers the glass against vibration stress during highway towing.

Marine-Grade Vinyl Exterior

UV-resistant outer shell stands up to sun, rain, and road spray. Will not crack, stiffen, or delaminate with repeated seasonal use.

Highway-Speed Retention

Cover is designed to stay in place at highway towing speeds -- no straps blowing loose or covers peeling back at 65 mph.

Three-Layer Construction Explained

The RVSHDY04 uses a three-layer laminate sandwich that balances impact absorption, weatherproofing, and pack-flat convenience:

  • Outer layer -- marine-grade vinyl: A heavy-duty UV-stabilized vinyl facing that sheds water and resists surface abrasion from airborne grit.
  • Core -- 3/8" closed-cell neoprene foam: The neoprene layer is the key impact buffer. Closed-cell construction means it does not absorb water or compress permanently with repeated use.
  • Inner layer -- soft backing: A non-abrasive inner face contacts the glass directly and will not scratch or pit the surface finish during installation or removal.

Why Front Cap Glass Breaks in Transit

Front cap glass is large, curved, and positioned directly in the path of everything thrown off the tow vehicle's tires. Rock chips are the obvious threat, but fatigue cracking from sustained vibration and thermal expansion stress is an equally common failure mode on long trips. A fitted cover addresses both -- it deflects hard projectiles and dampens the glass against road-induced flex.

Fitment: Which Rockwood Models This Covers

The RVSHDY04 is cut to match the front cap window opening on the following Forest River Rockwood series:

  • Rockwood Ultra Lite -- 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
  • Rockwood Signature Ultra Lite -- 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
  • Rockwood Super Lite -- 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

This cover is NOT designed for Rockwood Hard Side, Rockwood Mini Lite, Rockwood Geo Pro, or any Flagstaff, Coachmen, or other Forest River brand. If you are unsure whether your specific floor plan shares the same front cap glass profile, compare your VIN-decoded model designation against the series names listed above before ordering.

Installation Overview

The RVSHDY04 mounts on the exterior of the trailer before each trip and is removed at camp. No drilling, no permanent hardware, and no modifications to the trailer are required. The cover is designed to self-locate against the glass contour and secure via the retention system built into the cover edges. Exact installation details are included with the product.

Storage and Handling Tips

  • Store flat or loosely rolled -- avoid sharp creases in the foam core that can create permanent compression lines.
  • Clean the vinyl face with mild soap and water only. Solvent-based cleaners will degrade the UV coating.
  • Inspect the inner soft face before each season for debris that could scratch the glass during install.
  • Do not leave the cover installed during extended storage periods where trapped moisture could contact the glass seal.

Pair With a Front Cap Mask for Full Protection

The RV Shady covers the glass. Consider adding a front cap bra or full mask to protect the fiberglass cap itself from rock chips and UV fade on the painted or gel-coat surfaces surrounding the window opening. Trailersphere and other vendors offer cap-specific masks for the Rockwood family.

Product Identity

ManufacturerTrailersphere
Part NumberRVSHDY04
UPC850039692246
Product LineRV Shady Window Cover Series

Construction Specs

Outer MaterialMarine-grade UV-resistant vinyl
Core Material3/8" closed-cell neoprene foam
Inner FaceNon-abrasive soft backing (glass-safe)
Layer CountThree-layer laminate construction
Foam Thickness3/8" (approximately 9.5 mm)

Fitment Reference

BrandForest River
Series CoveredRockwood Ultra Lite, Rockwood Signature Ultra Lite, Rockwood Super Lite
Model Years2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
ApplicationFront cap exterior window glass
Fit TypeCustom die-cut -- model-specific, not universal

What Is in the Box

Included1x RVSHDY04 RV Shady window cover (cut to fit)
Not IncludedCap bra / front mask for surrounding fiberglass
Not IncludedSupplemental hardware (cover is hardware-free by design)

Use Case

Primary UseExterior glass protection during highway towing
Protects AgainstRock chips, road debris, vibration-stress cracking
Installation TypeExterior, removable -- no permanent modification
Speed RatingDesigned for highway towing speeds
Recommended UseInstall before every towing trip; remove at camp

Important Information -- Read Before Ordering

  • This cover is cut specifically for the Forest River Rockwood Ultra Lite, Signature Ultra Lite, and Super Lite front cap window -- model years 2019 through 2026 only. It will NOT fit other Rockwood sub-series or other Forest River brands.
  • Verify your trailer's series designation from the VIN sticker or Forest River build sheet before ordering. "Rockwood" alone is not sufficient -- the specific series (Ultra Lite, Signature Ultra Lite, Super Lite) must match.
  • This product protects the glass only. The surrounding fiberglass cap surface requires a separate cap bra or mask for rock chip protection.
  • Do not use solvents, petroleum-based products, or abrasive cleaners on the vinyl face -- they degrade the UV coating and shorten the product's service life.
  • Inspect retention edges before each trip. A cover that has worked loose at speed may contact the glass repeatedly and risk causing the type of surface damage it is meant to prevent.


Browse for more RV Accessories in the same category as this item:

Awning Sun & Shade > Shades & Visors
RV Accessories
Awning Sun & Shade


$400.54