Extruded butyl sealant tape for sealing joints, vents, accessories, and molding on RV roofs. Conforms to any shape without gaps. No-stretch peel-and-apply installation. 1/8" thick × 3/4" wide × 30 ft roll.
Conforms to uniquely shaped joints, irregular surfaces, and unusual patterns — no skips or runs
Maintains adhesion to galvanized metal after 30 days submerged at 120°F — ASTM tested
Flexible down to -20°F with no cracking — operating range from -20°F to 275°F
Continuous roll design — peel, apply, and seal quickly with no mixing, no curing, no tools required
1. Clean the surface — must be clean and free of moisture, dust, dirt, oil, and grease 2. Cut tape to desired length 3. Peel off the release liner 4. Apply to the seam, joint, opening, skylight frame, or accessory flange — do not stretch during application 5. Install or assemble components as required, pressing down to ensure full contact Cleanup: Use mineral spirits to clean up this product. Do not apply in weather-exposed areas where temperatures will exceed 190°F.
• BT-1834-1 — Single Roll, 30 ft (this listing) • BT-1834-5 — 6 Boxes of 5 Rolls (bulk pack)
📥 Download SDS for Dicor BT-1834-1 — Dicor Product Page Manufacturer: Dicor Products (an Airxcel brand) dicorproducts.com