Compact, strong, and easy to adjust — the Flash FORCE 67-00-7130 fits 2" hitch receivers and provides a 3" drop / 3-1/2" rise for stock-height trucks, SUVs, and trailers with smaller height differences. Includes reversible 2" and 2-5/16" chrome-plated hitch balls. Rated up to 8,000 lb with the 2" ball and 10,000 lb with the 2-5/16" ball. 1,000 lb max tongue weight.
The Fastway Flash FORCE 67-00-7130 is the compact 2" receiver model in the Flash FORCE adjustable steel ball mount family. With a 3" drop and 3-1/2" rise, it is ideal for everyday towing setups where only a modest height correction is needed — especially stock trucks, SUVs, and trailers that already sit close to level.
Unlike a fixed ball mount, the Flash FORCE gives you quick height adjustment and dual-ball convenience in one mount. The reversible ball platform lets you switch between 2" and 2-5/16" couplers, while the stowable design rotates beneath the vehicle when not in use to help protect shins, tailgates, and garage doors. Solid steel construction and Fastway's corrosion-resistant coating make it a durable choice for utility trailers, campers, boats, cargo trailers, and general bumper-pull towing.
Compact height correction for stock-height tow vehicles and trailer setups with minimal receiver-to-coupler height difference
Includes both 2" and 2-5/16" chrome-plated hitch balls so you can tow multiple trailer coupler sizes with one mount
Built from solid steel for dependable strength, with a corrosion-resistant coating for outdoor towing conditions
Rotates beneath the vehicle when not in use to help avoid shin hits, tailgate damage, and unnecessary garage clutter
The Flash FORCE 67-00-7130 is a ball mount — it does not provide weight distribution or sway control. If tongue weight causes rear sag, steering lightness, braking concerns, or trailer sway, a weight distribution hitch may be the correct solution instead of a standard ball mount. Capacity depends on ball size: This model is rated up to 8,000 lb with the 2" ball and up to 10,000 lb with the 2-5/16" ball. Maximum tongue weight is 1,000 lb. Never exceed the lowest-rated component in your towing system, including the ball mount, hitch ball, receiver hitch, tow vehicle, and trailer.
The 67-00-7130 is the shortest-drop Flash FORCE model, making it best for smaller height corrections. Confirm your measurement before ordering. Step 1: Park the tow vehicle and trailer on level ground. Step 2: Measure from the ground to the inside top edge of the tow vehicle's receiver opening. Step 3: Measure from the ground to the bottom of the trailer coupler when the trailer is level. Step 4: Compare the two measurements. If the receiver is higher than the coupler, you need drop. If the coupler is higher than the receiver, you need rise. Example — Drop: Receiver at 20" and coupler at 17" = 3" drop → 67-00-7130 is the correct Flash FORCE size. Example — Rise: Coupler at 22-1/2" and receiver at 19" = 3-1/2" rise → 67-00-7130 is correct when used in rise orientation. If your required drop or rise is greater than this model provides, choose a larger Flash FORCE model.
Installation Steps: 1. Confirm Drop or Rise: Verify whether your setup needs up to 3" drop or up to 3-1/2" rise 2. Select Ball Size: Use the 2" or 2-5/16" ball that matches your trailer coupler 3. Set Ball Height: Adjust the ball platform to the correct height and secure it with the adjustment pins 4. Insert into Receiver: Slide the shank into your 2" hitch receiver in the correct orientation 5. Secure the Mount: Install the appropriate hitch pin or locking pin for your receiver 6. Connect Trailer: Lower the trailer coupler onto the hitch ball and latch the coupler securely 7. Verify Level: Confirm the trailer rides level before towing Always verify the ratings of your tow vehicle, receiver hitch, ball mount, hitch ball, and trailer before towing.
In The Package: • (1) Flash FORCE Adjustable Steel Ball Mount Platform • (1) Adjustable Height Shank for 2" Receiver • (1) 2" Chrome-Plated Hitch Ball • (1) 2-5/16" Chrome-Plated Hitch Ball Sold Separately: • Locking pins / receiver lock hardware
Fastway Trailer Products: Website: fastwaytrailer.com/contact-us Made in the USA Fastway is a brand of Progress Mfg., a leading manufacturer of towing products including the Fastway and Equal-i-zer hitch lines.
Flash FORCE models use solid steel construction, dual chrome balls, and a stowable adjustable design. Select by receiver size and required drop/rise.
Need more drop in a 2" receiver? See the 67-00-7350 for 5" drop or 67-00-7570 for 7" drop. Need a 2-1/2" receiver version with higher 2-5/16" ball capacity? See the Flash FORCE HD models 67-00-7455 and 67-00-7675.