A factory-integrated window shade solution built specifically for Lippert RV entry doors. This kit replaces your existing door window frame with a complete assembly featuring tinted glass, a pleated EcoCell cellular shade, and a cord-free design that delivers privacy, insulation, and a clean finish -- no aftermarket blinds, no rattling hardware.
Lippert's Thin Shade EcoCell kit was engineered as a direct upgrade for Lippert-branded RV entry doors. Instead of clip-on panels or adhesive-mounted blinds, this shade is integrated directly into the replacement window frame -- the entire assembly swaps in where your original door window sits. The result is a factory-clean look with zero exposed cords, hooks, or mounting hardware.
The EcoCell accordion-style shade slides open and closed with a simple push or pull. When closed, the pleated fabric cells trap a layer of air between the glass and the RV interior, acting as a thermal buffer that helps keep heat out in summer and warmth in during cooler months. The included tinted glass adds a secondary layer of UV and glare protection year-round.
Pleated fabric cells trap air to create a thermal barrier, reducing heat gain in summer and heat loss in winter without adding bulk to your door.
Tinted glass is included in the kit, minimizing glare, reducing UV exposure, and maintaining natural light -- no separate film or tinting needed.
Accordion shade opens and closes with a gentle push or pull. No cords to tangle, no clips to lose, no noise from wind or road vibration.
Frame, glass, shade, window clips, and instructions included. Remove the old window frame, snap in the new assembly, and reattach. No modifications required.
Entry door windows are one of the largest sources of uncontrolled heat gain and privacy loss in an RV. Standard doors ship with bare glass or a basic snap-in cover that does little for temperature or light control. Full-timers, boondockers, and campground users all benefit from a shade that can be adjusted instantly -- especially when parked facing east in the morning or west in the afternoon.
The EcoCell design addresses this without the clutter of a traditional blind. Because the shade lives inside the window frame itself, there is nothing to remove or store when you want a clear view outside. Slide it open, and the glass does the work. Close it for complete privacy in seconds.
Cellular (honeycomb) shades are widely recognized as among the most insulating window coverings available. The trapped-air pockets in the pleated fabric reduce convective heat transfer at the glass surface, helping your RV's climate system work less hard. In hot climates, this is a meaningful comfort upgrade for any door-facing campsite.
Installation is a straightforward panel swap. Remove the existing window frame from the inside of your Lippert entry door, place the new EcoCell frame assembly into the opening, secure it with the included window clips, and the job is done. No drilling, no cutting, and no adhesives are needed. Most owners complete the swap in under 30 minutes with basic hand tools.
This kit is designed and dimensioned specifically for Lippert-branded RV entry doors. Before purchasing, confirm compatibility by checking the tag on the inside edge of your entry door or by measuring your existing window frame opening. The outer frame of this kit measures 24.72 inches wide by 15.72 inches tall.
This shade kit fits Lippert RV entry doors only. It will not fit entry doors manufactured by other brands (Barker, Hehr, etc.) or generic aftermarket replacement doors. Verify your door brand and window opening dimensions before ordering. The outer frame is 24.72 in x 15.72 in -- measure your existing frame to confirm before purchase.
The EcoCell fabric shade can be lightly dusted with a dry microfiber cloth or vacuumed with a brush attachment on low suction. Avoid saturating the pleated fabric with liquid cleaners. The tinted glass surface can be cleaned with standard glass cleaner and a soft cloth. Inspect the window clips annually and replace if clips show cracking or loss of retention.
The Lippert 2025009148 Thin Shade EcoCell Window Shade Kit is a complete upgrade designed exclusively for Lippert RV entry doors. Unlike snap-on panels or bulky blinds, this shade is built directly into the window frame for a seamless fit. Its accordion-style operation allows you to open or close it effortlessly with a push or pull—no cords, knobs, or external covers required.
Built with EcoCell cellular technology, the pleated fabric shade traps air inside its cells to create a natural insulating barrier. This design helps stabilize your RV’s interior climate, keeping it cooler during hot summer days and warmer during cold nights. By reducing heating and cooling demands, it improves energy efficiency while adding year-round comfort. Combined with the included tinted glass window, it also minimizes glare, blocks harmful UV rays, and enhances privacy while protecting interior furnishings from fading.
This all-in-one kit is designed for fast installation with no special tools or modifications needed. It includes a tinted glass insert, black interior and exterior frames, an EcoCell shade, installation hardware, and a step-by-step manual. In just minutes, you can replace outdated window shades with a built-in solution that looks and functions better.
With its clean, streamlined appearance, the Thin Shade EcoCell Kit enhances your RV’s entry door without the clutter of traditional blinds. The integrated design eliminates rattling, swinging, or noise from loose shades, giving you a quieter and more polished option. Made in the USA with durable materials, this shade kit combines performance, comfort, and style for a long-lasting RV window upgrade.